RPI’s disaster management simulator

A disaster may never occur, but it is nice to know if one does, a system is in place to take on whatever elements present themselves.

06/25/2012


ISS SourceA disaster may never occur, but it is nice to know if one does, a system is in place to take on whatever elements present themselves.

That is why engineers and scientists at Rensselaer Polytechnic Institute (RPI) in Troy, N.Y., are developing powerful decision-making and data visualization tools for emergency management. These tools aim to help law enforcement, health officials, water and electric utilities, and others collaboratively and effectively respond to disasters.

Three RPI researchers demonstrated a prototype of this new technology for federal, state, and local officials, including representatives from the Dept. of Homeland Security and New York state.

The interdisciplinary research project is a collaboration between William “Al” Wallace, the Yamada Corp. Professor at RPI, and a member of the Dept. of Industrial and Systems Engineering (ISE); Barbara Cutler, associate professor in the Dept. of Computer Science; and David Mendonça, associate professor in ISE.

“Just as disaster response is a collaboration between many different agencies and decision makers, a project of this scope and ambition requires the expertise of faculty and students from different disciplines,” said Wallace, who has a joint appointment in the Dept. of Civil and Environmental Engineering. “We are delighted to share our progress with our friends and partners at federal, state, and other agencies. Their feedback, comments, and suggestions are vital to the progress and success of our research.”

This new technology combines Wallace’s expertise in infrastructure systems, Cutler’s research on augmented reality and data visualization, and Mendonça’s research on improvisation and decision making in unique disaster and emergency situations.

The prototype features a map of a disaster area projected onto the movie theater-sized screen, with overlays detailing the location of hospitals, power plants, temporary shelters, and many other key landmarks, infrastructure, and critical data. Due to the complexity and interconnectedness of these infrastructure systems and data, responding organizations must collaborate to be effective. The system enables emergency officials from different backgrounds and different agencies to interact with the data collaboratively and at the same time.

The researchers are also developing ways to use this environment to better study decision making. It is rare for researchers to have an opportunity to observe the work of emergency response managers and responding organizations during an actual disaster. So the new technology is able to simulate emergency situations using data from past disasters and other simulations techniques.

Funded by the Dept. of Homeland Security’s Coastal Hazards Center of Excellence, as well as a Seed Grant from the office of the Vice President for Research at RPI, this project can advance basic knowledge of sources of resilience — or “bounce back” — in infrastructure systems, and to produce tools and technologies for leveraging these sources.



The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
A new approach to the Skills Gap; Community colleges may hold the key for manufacturing; 2017 Engineering Leaders Under 40
Doubling down on digital manufacturing; Data driving predictive maintenance; Electric motors and generators; Rewarding operational improvement
2017 Lubrication Guide; Software tools; Microgrids and energy strategies; Use robots effectively
The cloud, mobility, and remote operations; SCADA and contextual mobility; Custom UPS empowering a secure pipeline
Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Power system design for high-performance buildings; mitigating arc flash hazards
Research team developing Tesla coil designs; Implementing wireless process sensing
Commissioning electrical systems; Designing emergency and standby generator systems; Paralleling switchgear generator systems

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Featured articles highlight technologies that enable the Industrial Internet of Things, IIoT-related products and strategies to get data more easily to the user.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me