Reduce human errors: Get out of the typing pool

Engineering and IT Insight: Error-proofing can include adding automation to processes that are dangerous, dirty, exacting, or repetitive. Manual entry of signatures, dates, and times is a candidate. Use keyboard wedges to scan predefined reason codes, enter user IDs, and provide biometric identification. Convert voice to text to reduce errors and speed manual data entry.


Industrial HMI by Control Engineering, CFE MediaManufacturing companies have long realized that the greatest source of error in manufacturing is human error, and it is a large part of the reason that automation is applied to any process that is dangerous, dirty, exacting, or repetitive. However, in many systems, there is another source of human error that is on the rise. This source is manual recording of data and comments, and in the increasingly regulated manufacturing environment, signatures, date, and times are becoming more common. Comments must also be added to production records to record the reason for discrepancies, providing data for productivity improvements and 6-sigma projects.

IT and Engineering Insights for better system integration

Manually typed data, including signatures, values, and comments, is inherently error-prone. Even best-in-class typists have error rates that are about 4 sigma processes (99.4% correct, or less than 1 error per 100 words before corrections). Production operators are not best-in-class typists; typing skills are usually not part of their required skill set or included in their training plans.

Consider your own error rate when entering a phone number, entering a date, or even writing a simple comment on an unexpected event. If you have error rates of 3 sigma (about 7 errors per 100 words before correction), then you have excellent typing skills.

How can we design 6-sigma processes when the manual data entry part of the process has error rates about 3 sigma? This problem has plagued the regulated industries for a long time. Manufacturing execution systems (MES) have replaced written entries with typed entries and have removed the need to record dates and times. Unfortunately, poor penmanship has been replaced by mistyped data. Operators must still enter user IDs and passwords for electronic signatures and must enter comments and observations on production events. User IDs and passwords have a built-in error check, but even entering these short strings produces enough errors that industrial users turn off bad password lock-out checks.

The answer to reducing errors is to remove the need for typing in as many places as possible, and there are some simple techniques to use. A primary method to reduce typing is to use a “keyboard wedge.” A keyboard wedge is a device that that simulates keyboard data. It reads magnetic strips, bar codes, radio frequency identification (RFID) tags, smart-card codes, or other input, which is then routed to the keyboard buffer so it appears as if it was typed in. The term “wedge” comes from the fact that the device usually wedges between the keyboard and the system. The growth of USB ports means that any system can support multiple keyboard wedge devices.

Most companies’ employee cards now include an RFID chip for use with badge readers. A keyboard wedge that reads the employee badge can be used to enter the ID for an electronic signature. This method cuts by more than half the time to enter an electronic signature. Employees don’t have to remember their ID and then type it correctly, so errors and retries are eliminated. If your application supports hot keys (such as F5) that move the cursor to the User ID field, then even more time is saved and errors reduced.

Bar code scanner keyboard wedges can also be used for entry of predefined comments and observations. Most production lines have a small number of problems that cause the majority of the production discrepancies. A bar code scanner and a printed sheet with common problems encoded in bar codes can eliminate the need for manual typing of observations and comments. This reduces the time to enter comments and eliminates errors.

Fingerprint scanners and facial recognition can be used to eliminate the need for any keyboard interaction for electronic signatures. Both systems usually directly connect to a system’s underlying operating system. Fingerprint scanners provide a biometric method for identifying a person, and when combined with an RFID-enabled badge, meet the requirements for an electronic signature. Fingerprint readers are available on laptops or integrated with keyboards. Not all environments are suitable for fingerprint readers, but an alternative is facial recognition. An inexpensive webcam combined with the appropriate software also can be used for electronic signatures. Facial recognition systems have very low false-positive error rates, even in environments where operators must wear partial facial protection, such as hair nets and beard nets. Facial recognition systems also have the capability of recording a picture of the person electronically signing, providing undisputable evidence of the electronic signature.

In the future, two methods are emerging that could further eliminate manual errors on typing. These are voice recognition and gestures. While voice recognition systems have made fantastic advances in recent years, their error rates in office environments for free text entry are still in the same range as manually typed data. The accuracy rate is further reduced in production environments because they are noisier than offices. Voice recognition can be effectively used to replace simple typed commands, usually from a limited set of valid responses. Voice recognition can be especially useful in environments where an operator’s hands are unavailable for typing, such as in warehouses, gloved environments, and driving situations.

Gestures are becoming popular in video games but have not yet made the transition to commercial use. Anyone who has used a Microsoft Kinect or watched a Hollywood high-tech movie can see computers being controlled by gestures. It’s not clear yet what the error rates will be on gesture-defined input, but it is hard to image that it will be lower than manually typed data.

Reducing manual data entry errors is possible. You can reduce or even eliminate the inherently 3-sigma process of typing on your systems by using a combination of alternate entry devices. Use keyboard wedges to scan predefined reason codes, enter user IDs, and provide biometric identification. Convert voice to text to reduce errors and speed up manual data entry tasks. All of these devices will get your operational staff out of the typing pool and back to value-added production activities.

- Dennis Brandl is president of BR&L Consulting in Cary, N.C., His firm focuses on manufacturing IT. Contact him at; Edited by Mark T. Hoske, content manager CFE Media, Control Engineering. 

- Read more Engineering and IT Insight columns: atop search “Brandl”

- Search “HMI design” to gain more advice

- has a webcast on HMI design

No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2013 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
A cool solution: Collaboration, chemistry leads to foundry coat product development; See the 2015 Product of the Year Finalists
Raising the standard: What's new with NFPA 70E; A global view of manufacturing; Maintenance data; Fit bearings properly
Sister act: Building on their father's legacy, a new generation moves Bales Metal Surface Solutions forward; Meet the 2015 Engineering Leaders Under 40
Cyber security cost-efficient for industrial control systems; Extracting full value from operational data; Managing cyber security risks
Drilling for Big Data: Managing the flow of information; Big data drilldown series: Challenge and opportunity; OT to IT: Creating a circle of improvement; Industry loses best workers, again
Pipeline vulnerabilities? Securing hydrocarbon transit; Predictive analytics hit the mainstream; Dirty pipelines decrease flow, production—pig your line; Ensuring pipeline physical and cyber security
Upgrading secondary control systems; Keeping enclosures conditioned; Diagnostics increase equipment uptime; Mechatronics simplifies machine design
Designing positive-energy buildings; Ensuring power quality; Complying with NFPA 110; Minimizing arc flash hazards
Building high availability into industrial computers; Of key metrics and myth busting; The truth about five common VFD myths

Annual Salary Survey

After almost a decade of uncertainty, the confidence of plant floor managers is soaring. Even with a number of challenges and while implementing new technologies, there is a renewed sense of optimism among plant managers about their business and their future.

The respondents to the 2014 Plant Engineering Salary Survey come from throughout the U.S. and serve a variety of industries, but they are uniform in their optimism about manufacturing. This year’s survey found 79% consider manufacturing a secure career. That’s up from 75% in 2013 and significantly higher than the 63% figure when Plant Engineering first started asking that question a decade ago.

Read more: 2014 Salary Survey: Confidence rises amid the challenges

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.