Radar level transmitter for solids

Siemens introduces its Sitrans LR560 using 78 GHz (W band) for high accuracy with dusty solids.

03/07/2011


Siemens introduces its Sitrans LR560 using 78 GHz (W band) for high accuracy with dusty solids.Siemens Industry Automation Division has announced its launch of the Sitrans LR560, which it characterizes as the first 78 GHz (W Band) microwave radar level transmitter for solids level measurement. Siemens says the new unit combines level measuring with superior accuracy in tough environments, with intelligent signal processing for optimum performance at all operating stages.

The Sitrans LR560 transmitter is equipped with a newly developed lens-style antenna and uses non-contacting two-wire FMCW (frequency modulated continuous wave) radar technology. This new design is particularly suited for hot (up to 392 °F / 200 °C), dusty applications such as cement powder, plastic powder or pellets, grain, coal, wood powder, and fly ash. The vessel can be pressurized up to 44 psi (3 bar). Instrumentation technicians can change programming even in a hazardous environment using an intrinsically safe handheld programmer without having to open the instrument’s lid.

The transmitter has a measurement range of 100 m (328 ft.), using a narrow four-degree beam. This helps it avoid silo wall obstructions and other installation interferences, allowing it to be installed virtually anywhere on the top of the silo. Its high frequency also enables the unit to emit a very short wavelength to provide exceptional signal reflection, even from solids with a steep angle of repose. The high resolution graphical interface with its Quick Start Wizard menu guides the user and expedites start-time to less than one minute for accurate and reliable level measurement readings without any fine-tuning.

Connectivity options include HART, Profibus PA, or Foundation fieldbus protocols. Programming is supported locally with pushbuttons or an infrared handheld programmer. The transmitter also supports remote configuration and diagnostics with Siemens’ Simatic PDM (process device manager), Emerson AMS, or Pactware using Siemens DTM. The local display interface features a backlit display and can be rotated to four positions for easier viewing.

The antenna is resistant to material build-up, but also has a built-in purge system for cleaning exceptionally sticky solids material. While its high-frequency operation normally makes aiming unnecessary, an optional aiming flange helps direct the beam to an area of specific interest, such as the discharge area of a silo cone. Sitrans LR560 includes an optional graphical local display interface that improves setup and operation using an intuitive Quick Start Wizard, and echo profile display for diagnostic support.

www.usa.siemens.com/automation

Visit the Control Engineering Process Control Channel

Edited by Peter Welander, pwelander@cfemedia.com



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
World-class maintenance: The three keys to success - Deploy people, process and technology; 2016 Lubrication Guide; Why hydraulic systems get hot
Your leaks start here: Take a disciplined approach with your hydraulic system; U.S. presence at Hannover Messe a rousing success
Hannover Messe 2016: Taking hold of the future - Partner Country status spotlights U.S. manufacturing; Honoring manufacturing excellence: The 2015 Product of the Year Winners
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Digital oilfields: Integrated HMI/SCADA systems enable smarter data acquisition; Real-world impact of simulation; Electric actuator technology prospers in production fields
Improving flowmeter calibration; Selecting flowmeters for natural gas; Case study: Streamlining assembly systems using PC-based control; CLPM: Improving process efficiency, throughput
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Warehouse winter comfort: The HTHV solution; Cooling with natural gas; Plastics industry booming

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me