PVSEC 2011 - Another trade show, another drop in module prices?

While prices are declining for modules, the industry is expected to level off with increased demand in the fourth quarter of 2011.

09/12/2011


 

Arriving at PVSEC on the first day of the exhibition, I couldn’t help but notice the stark difference to Intersolar Europe, just three months earlier. Although both PV exhibitions were in German cities, the atmosphere at the two shows could not have felt more different.

Despite the uncertain market conditions at the time, June’s Intersolar Europe had a vibrant atmosphere, with halls filled with extravagant booths and lively music. On the other hand, suppliers at PVSEC seemed downbeat and the halls seemed comparatively quiet, with some major suppliers noticeably absent.

There was however a common talking point amongst the people attending both exhibitions – module prices.

At Intersolar Europe there was constant talk of module prices falling and following the show they dropped at an alarming rate, the result of perhaps a self-fulfilling prophesy. These rapid price declines were attributed to suppliers attempting to clear inventory which had risen sharply following a sudden collapse in demand in the Italian market.

Similarly, at PVSEC reports that module prices were rapidly falling were fuelled by a new ‘lowest price’ being heard almost hourly. Some smaller Chinese suppliers admitted to us that they were selling modules below cost in an attempt to generate better cash flow. These prices are clearly unsustainable and not necessarily indicative of module prices on the whole. However, the danger is that by the time that the aggressive price reductions of a select few companies had spread throughout the exhibition halls, perceived industry average prices had been pushed downwards. Consequently, other suppliers may be forced to reduce prices further in order to appear competitive and prices could be forced into another downward spiral, similar to that seen after Intersolar.

In my opinion, with the exception of the sharp declines seen at PVSEC (and possibly immediately after), we will see module price reductions slow in the remainder of 2011. Current price levels for modules (and cells and wafers) are already unsustainably low, which makes further declines very difficult. Prices are also likely to benefit from demand returning in the fourth quarter.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
2017 Lubrication Guide; Software tools; Microgrids and energy strategies; Use robots effectively
Prescriptive maintenance; Hannover Messe 2017 recap; Reduce welding errors
Safety standards and electrical test instruments; Product of the Year winners; Easy and safe electrical design
Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Diagnostic functions for system safety; Specifying industrial enclosures; Effective decision support for a crisis
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Natural gas for tomorrow's fleets; Colleges and universities moving to CHP; Power and steam and frozen foods

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Featured articles highlight technologies that enable the Industrial Internet of Things, IIoT-related products and strategies to get data more easily to the user.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me