Pulse control module for time proportional output
Omega Engineering's PCM5 is designed to transmit a signal of up to 20 mA from a process/temperature controller to a time proportional output.
The OMEGA PCM5 Series converter is designed to convert a 4 to 20 mA signal from a process/temperature controller or computer to a time proportional output.
The modules mount directly to the input terminals on a 3 to 32 Vdc input SSR, and supports single phase 50 or 60 Hz operation. Lever clamps are provided on the converter for the 4 to 20 mA input.
The SSR’s power section provides easy connection to the line and load.
Analog Input Signal: 4 to 20 mA minimal; 0 to 30 mA permissible; reverse polarity protected; no abnormal operation below 4 mA Compliance Voltage Requirement: 6.4V
Time Base: ~200 mS @ 50%, ~500 mS towards 0 and 100%
Ambient Temperature: 0 to 40°C (32 to 104°F)
Dimensions: 45 L x 51 W x (1.75 x 2.0 x 0.80") 20 mm D
- Edited by Chris Vavra, Control Engineering, www.controleng.com
- Events & Awards
- Magazine Archives
- Oil & Gas Engineering
- Salary Survey
- Digital Reports
Annual Salary Survey
After almost a decade of uncertainty, the confidence of plant floor managers is soaring. Even with a number of challenges and while implementing new technologies, there is a renewed sense of optimism among plant managers about their business and their future.
The respondents to the 2014 Plant Engineering Salary Survey come from throughout the U.S. and serve a variety of industries, but they are uniform in their optimism about manufacturing. This year’s survey found 79% consider manufacturing a secure career. That’s up from 75% in 2013 and significantly higher than the 63% figure when Plant Engineering first started asking that question a decade ago.