ProMat, robotics shows to combine forces in 2011

Material Handling Industry of America and the Automation Technologies Council announced that ProMat and The International Robots, Vision & Motion Control Show will collocate in 2011. Both exhibitions will be held March 21-24, 2011 at Chicago’s McCormick Place. ATC is the umbrella group for Robotic Industries Association, Automated Imaging Association and Motion Control Association.

02/01/2010


 

 

 

Material Handling Industry of America and the Automation Technologies Council announced that ProMat and The International Robots, Vision & Motion Control Show will collocate in 2011.

 

Both exhibitions will be held March 21-24, 2011 at Chicago’s McCormick Place. ATC is the umbrella group for Robotic Industries Association, Automated Imaging Association and Motion Control Association.

 

“The decision to collocate ProMat 2011 and the International Robots, Vision & Motion Control Show was made for several reasons,” according to John Nofsinger, Chief Executive Officer for MHIA. “Co-locating the two events will allow manufacturing, distribution and supply chain professionals unparalleled education and networking opportunities as well as exposure to the largest equipment and technology display of any show of its kind in North America.

 

“In today’s world of needing to be nimble and innovative, the collocation is a home run for participants and attendees of both events.”

 

“Robotics, vision and motion control are important components as companies strive to reach their productivity goals,” said Jeffrey A. Burnstein, President of ATC. “We feel this collocation provides an incredible opportunity for the exhibitors and visitors of each show to meet new prospects and suppliers, see new products and obtain new knowledge.”

 

Show officials said the collocated ProMat 2011 and International Robots, Vision & Motion Control Show will be the largest international event and conference of its kind ever held in the U.S.

 

More than 825 exhibitors are expected to showcase their solutions to tens of thousands of manufacturing, warehousing and distribution professionals from more than 100 countries around the globe.

 

“Over the past several years, ProMat has experienced a steady increase in both quantity and quality attendees and exhibitors delivering more material handling and logistics solutions for the supply chain. The collocation of the International Robots, Vision & Motion Control Show is a natural value-adding fit for both events,” said Nofsinger.

 

 

 



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Strategic outsourcing delivers efficiency; Sleeve bearing clearance; Causes of water hammer; Improve air quality; Maintenance safety; GAMS preview
World-class maintenance: The three keys to success - Deploy people, process and technology; 2016 Lubrication Guide; Why hydraulic systems get hot
Your leaks start here: Take a disciplined approach with your hydraulic system; U.S. presence at Hannover Messe a rousing success
Flexible offshore fire protection; Big Data's impact on operations; Bridging the skills gap; Identifying security risks
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me