PMI jumps to highest level in 2013 as growth accelerates

Manufacturing Index hits 55.7% in August to extend growth streak

09/03/2013


Manufacturing’s summer surge continued in August, as the monthly ISM Report rose for the third straight month to its highest level of 2013.

The Institute for Supply Management’s PMI for August was at 55.7%, an increase of 0.3 percentage points from July’s high-water mark and the tenth increase in the last 12 months. Since the PMI fell to a regressive level of 49.0% in May, the PMI has climbed almost 7 percentages points to reach a new high for the past 12 months. A figure above 50% indicates general growth for manufacturing. A figure above 43.2% indicates growth for the general economy, so August’s figure marked the 51st consecutive month of economic growth.

All major indicators were positive for August, according to Bradley Holcomb, chairman of the ISM Business Survey Committee. “The Prices Index registered 54%, increasing 5 percentage points from July, indicating that overall raw materials prices increased when compared to last month. Comments from the panel range from slow to improving business conditions depending upon the industry,” Holcomb said.

The Institute for Supply Management's Manufacturing Index hits 55.7%, the highest so far in 2013, in August to extend growth streak. Courtesy: ISMThe New Orders Index rose 4.9 percentage points in August to 63.2%, its highest level of the year, and manufacturers sounded optimistic about future prospects. Among the comments from survey participants:

  • "Slight improvements in both domestic and international sales." (Fabricated Metal Products)
  • "Material prices continue to be favorable; business is steady." (Paper Products)
  • "Slowing down slightly, but still stronger than last year by 20%." (Furniture & Related Products)
  • "Summer seasonal businesses are doing well after a late start." (Printing & Related Support Activities)
  • "Still not seeing the year we had expected. Cautious about the balance of 2013." (Machinery)
  • "Tight government spending still affecting business." (Transportation Equipment)
  • "With improved weather outlook in the central states, agricultural prices are relaxing year over year." (Food, Beverage & Tobacco Products)
  • "We have benefitted from the Yen; seeing a 20 percent decrease in material costs from 2012 to 2013." (Chemical Products)

"The past relationship between the PMI and the overall economy indicates that the average PMI for January through August (52.5%) corresponds to a 3.2% increase in real gross domestic product on an annualized basis,” Holcomb said. “In addition, if the PMI for August (55.7%) is annualized, it corresponds to a 4.2% increase in real GDP annually.”

The Last 12 Months

The Institute for Supply Management's Manufacturing Index hits 55.7%, the highest so far in 2013, in August to extend growth streak. Courtesy: ISM



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
Strategic outsourcing delivers efficiency; Sleeve bearing clearance; Causes of water hammer; Improve air quality; Maintenance safety; GAMS preview
World-class maintenance: The three keys to success - Deploy people, process and technology; 2016 Lubrication Guide; Why hydraulic systems get hot
Flexible offshore fire protection; Big Data's impact on operations; Bridging the skills gap; Identifying security risks
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me