Plant tour: Gaining efficiencies in mechanical drives

Look for operating and energy efficiencies and how to add customer value throughout the product lifecycle. These were among bits of advice for manufacturers gleaned from Siemens Mechanical Drives plant tours.


Manufacturers need to seek ways to lower operating costs, energy use, and downtime; increase reliability and quality; and seek improvements throughout a product’s lifecycle. Also, look at the advantages of upgrades before parts wear out. Go to customers’ sites, and if you run into challenges, improve based on what you’ve learned.

Peter Herzhoff, plant manager for the Siemens Tollgate mechanical drive facility, explains to Tim Gauer (left), product manager for standard gear units and couplings, and others on a plant tour that the $2.3 million CNC machine behind him increased througThese were bits of advices gleaned before, during, and after a March 22 Siemens Mechanical Drives plant tour in Elgin, Ill. Siemens Industry hosted a media event, where Aarnout Kant, general manager of the mechanical drives unit, and other experts offered advice. Peter Herzhoff and Jacob Schiff, mechanical drives plant managers for the Tollgate and Madeline plants, respectively, in Elgin, Ill., also offered advice for manufacturers, including the following. 

- Listen to customers, visit their sites, and improve products and services throughout the product lifecycles. (Click here to see a video that explains how a screwdriver resulted in several design changes that reduced future downtime.)

3-D design and modeling software speeds development, transferring specifications directly into the CNC machines at the Siemens Tollgate mechanical drive facility. Mark T. Hoske photo, CFE Media- Simplify and integrate systems, cutting out components and even unneeded features where practical, to improve reliability and energy efficiency. In motion systems, fewer points of power transfer increase overall system efficiency. And an integrated system eliminates any possibility of finger-pointing in the rare case of a failure, adding customer confidence. Using 3-D modeling software speeds development.

- Look for features and functions that reduce downtime in the long term; though they may add to initial capital costs, they almost always result in a “yes” from end users interested in maximizing productivity.

- Use long-time employees with more experience to contribute, mentor, and teach younger team members.

- Ask plant-floor personnel for their ideas to improve safety, eliminate waste, and improve efficiency, and reward them for their efforts.

- Invest in local manufacturing expertise in ways that logistic costs and lower lead times for customers, which helps add market share. Use sensors to take critical measurements, and invest in new computers and new software to monitor and processes to keep quality high. 

- Especially with expansions, renovations, and new plants, find ways to ensure products keep moving from design through manufacturing and shipping, limiting travel time and distance.

At the Siemens Madeline plant, in addition to providing gearboxes for wind turbines, gearboxes are reworked and refurbished at a savings to buying new. Mark T. Hoske photo, CFE Media- Expand markets by adapting or scaling systems larger, when practical, to add efficiencies, and then seek new markets for those new designs. (Siemens found that wind gear units are very similar to those needed for the emerging market of tidal power generation. Taconite seals allow gear-reducing packages to be used in large-equipment mining applications.)

- Shift toward service or upgrades in mature markets and consider leaving or selling lower efficiency product lines. (Siemens sold its worm-drive business; helical or bevel helical gear designs offer 25%-30% greater efficiency.)

- Re-examine markets you left, because there might be good reasons to reinvest and return.

Layout for the Siemens Tollgate mechanical drive manufacturing plant minimizes travel with logical machine placement, including this one with Siemens Sinumerik CNC controls, adding efficiency. Mark T. Hoske photo, CFE Media- Look for opportunities to add throughput and energy efficiencies with replacements. (A Siemens customer with a large concrete-crushing mill that’s worked since 1969, retrofit the gearbox in a higher-power upgrade.)

- For critical parts (in these plants, all are critical), track the origin, number the parts with serial numbers or data matrix codes, and inspect everything, at multiple stages of production. Ensure suppliers provide parts or materials that are tested. (Video shows a finished gear being tested for size with an automated machine that compensates for temperature. A difference of 1 F can translate into a 10-micrometer size difference.)

- Line up agreements from multiple suppliers, especially in tight markets like specialty steel, to lower lead times for customers.

4-ft dia. gears (left) are the largest made at the Siemens Tollgate plant in Elgin, Ill., though larger ones (not shown) are serviced there, using 120-ton crane capacity. At right are some of the seven heat-treat ovens where the gears are heated to 1500 F- Use natural lighting where practical and retrofit to high-efficiency lighting, where high-efficiency tubular fluorescent (T5) lighting can be 50% more efficient than old T12 fixtures. [The Madeline plant was among the first manufacturing plants with LEED (Leadership in Energy and Environmental Design) certification, with attributes well beyond lighting, such as wise use of water—there are only two floor drains in the whole place, and those are for snow runoff from trucks that come inside.]

Gears and gearboxes for windmills, tide generators, concrete mills, mining machinery, geared motors, conveyors, locomotives, and other applications are manufactured by Siemens, though most at the Siemens Tollgate mechanical drive facility are for wind app- Set up key metrics for each area of the plant, display them, and discuss anomalies (yellow or red, instead of green) daily—or more often, if needed. (Only one gear was found to be off-spec from grinding damage in 2.5 years, with throughput of more about 1,000 gears monthly, since start-up.) Light trees give visual cues on workcell status. Siemens uses the 5S strategy, among others. (5S is sort, simplify, shine, standardize, and sustain. Safety is often included for good measure.)

Aarnout Kant, general manager of the mechanical drives unit for Siemens in Elgin, Ill. Mark T. Hoske, photo, CFE Media- Reconsider processes, even ones deemed efficient, when brought from other plants. (One process at the Madeline plant was reduced from 180 hours to 125, with local employee input.)

- Use models to help people remember strategies. The Siemens manufacturing strategy is represented by a house with a foundation, four pillars, and a roof. The foundation is people and continuous improvement, pillars are target and performance measurement (TPM), product lifecycle management (PLM), supply chain management (SCM), and customer relationship management (CRM), covered by a roof of production strategy.

- Take advantage of local and federal programs where it makes sense. (Local to the Siemens plants, the Elgin Chamber of Commerce promotes more efficient hiring by promoting a national career-readiness certificate.)

- Mark T. Hoske is CFE Media content manager, Control Engineering, Plant EngineeringConsulting-Specifying Engineer

Think Again: Improve Processes, Then Automate[tt_news]=44667

No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Your leaks start here: Take a disciplined approach with your hydraulic system; U.S. presence at Hannover Messe a rousing success
Hannover Messe 2016: Taking hold of the future - Partner Country status spotlights U.S. manufacturing; Honoring manufacturing excellence: The 2015 Product of the Year Winners
Inside IIoT: How technology, strategy can improve your operation; Dry media or web scrubber?; Six steps to design a PM program
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Digital oilfields: Integrated HMI/SCADA systems enable smarter data acquisition; Real-world impact of simulation; Electric actuator technology prospers in production fields
Special report: U.S. natural gas; LNG transport technologies evolve to meet market demand; Understanding new methane regulations; Predictive maintenance for gas pipeline compressors
Warehouse winter comfort: The HTHV solution; Cooling with natural gas; Plastics industry booming
Managing automation upgrades, retrofits; Making technical, business sense; Ensuring network cyber security
Designing generator systems; Using online commissioning tools; Selective coordination best practices

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me