OSHA renews strategic partnership to reduce injuries, lost work time at Ford Motor Co. auto plants

Partnership includes UAW, ACH and MIOSHA in partnership with OSHA, Department of Labor

06/13/2011


OSHA administrator Dr. David Michaels has signed an agreement renewing OSHA’s partnership with Ford Motor Co., the United Automobile, Aerospace and Agricultural Implement Workers of America and Automotive Component Holdings LLC, and welcoming the Michigan Occupational Safety and Health Administration as a new partner.

“OSHA’s partnership with Ford and the UAW has helped significantly reduce the frequency and severity of worker injuries,” said Michaels. “The partnership is a win-win for management and labor. It contributes to Ford’s competitiveness in the global economy while protecting the safety and health of thousands of workers.”

The goal of this strategic partnership is to prevent occupational fatalities, injuries and illnesses at participating Ford Motor Co. and Automotive Component Holdings locations in Michigan, Ohio, Illinois, Missouri and New York.

Since 2000, OSHA has had a partnership with Ford and the UAW. ACH joined the partnership more recently. The partnership has resulted in a 74 percent reduction in total case incident rates and an 88 percent decrease in days away from work, restricted duty and job transfers, better known as “DART,” rates. In 2010, 75 percent of worksites participating in this partnership had DART rates below Labor Department’s Bureau of Labor Statistics industry averages.

Plants covered by this agreement under federal OSHA include: Chicago Assembly Plant and Chicago Stamping Plant, Chicago, Ill.; Kansas City Stamping Plant, Kansas City, Mo.; Buffalo Stamping Plant, Hamburg, N.Y.; Cleveland Engine Plants 1 and 2, Brook Park, Ohio; Lima Engine Plant, Lima, Ohio; Ohio Assembly Plant, Avon Lake, Ohio; Sharonville Transmission Pant, Sharonville, Ohio; Sandusky Plastics Plant, Sandusky, Ohio; and Walton Hills Stamping Plant, Walton Hills, Ohio.

Michigan plants covered by this agreement under state OSHA include: Dearborn Tool and Die Plant; Dearborn Truck Plant; Dearborn Diversified Manufacturing Plant; Dearborn Stamping Plant; Dearborn Engine and Fuel Tank Plant; Michigan Assembly Plant in Wayne; Woodhaven Stamping Plant; Livonia Transmission Plant and National PDC in Livonia; Van Dyke Transmission Plant and Sterling Transaxle Plant in Sterling Heights; Romeo Engine Plant; Rawsonville Parts Plant; Brownstown Parts Redistribution Center in Romulus; Woodhaven Forge Plant; and Saline Instruments and Plastics Plant and the Sheldon Road Plant in Plymouth Township.

www.osha.gov

 - Edited by Chris Vavra, Plant Engineering, www.plantengineering.com



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2013 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Leaders Under 40 program features outstanding young people who are making a difference in manufacturing. View the 2013 Leaders here.
The new control room: It's got all the bells and whistles - and alarms, too; Remote maintenance; Specifying VFDs
2014 forecast issue: To serve and to manufacture - Veterans will bring skill and discipline to the plant floor if we can find a way to get them there.
2013 Top Plant: Lincoln Electric Company, Cleveland, Ohio
Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Plant Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.

Why manufacturers need to see energy in a different light: Current approaches to energy management yield quick savings, but leave plant managers searching for ways of improving on those early gains.
Electric motor power measurement and analysis: Understand the basics to drive greater efficiency; Selecting the right control chart; Linear position sensors gain acceptance
Protecting standby generators for mission critical facilities; Selecting energy-efficient transformers; Integrating power monitoring systems; Mitigating harmonics in electrical systems

Annual Salary Survey

Participate in the 2013 Salary Survey

In a year when manufacturing continued to lead the economic rebound, it makes sense that plant manager bonuses rebounded. Plant Engineering’s annual Salary Survey shows both wages and bonuses rose in 2012 after a retreat the year before.

Average salary across all job titles for plant floor management rose 3.5% to $95,446, and bonus compensation jumped to $15,162, a 4.2% increase from the 2010 level and double the 2011 total, which showed a sharp drop in bonus.

2012 Salary Survey Analysis

2012 Salary Survey Results

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.