Now arriving: Automation technology for airport entrance control

Automation is becoming more common at airports in an attempt to cut costs while maintaining appropriate levels of security, though the airport environment remains a challenge.

11/19/2013


In a bid to cut costs while maintaining acceptable levels of customer service, airports are adopting automation for repetitive tasks involving security and access control.

Every day in airports across the world, countless employees are tasked with sitting at entry/exit doors, scanning boarding passes and other tasks. These duties can be easily and effectively automated through electronics, according to a new report entitled “The World Market for Pedestrian Entrance Control Equipment” from IHS Inc. (NYSE: IHS).

“Automation at airports represents a huge opportunity for suppliers of pedestrian entrance control equipment, particularly those that specialize in speed gates,” said Omar Talpur, security, fire and access control analyst at IHS. “The first process that everyone thinks about—and the area where there has probably been the most progress—is boarding control.

“In most airports around the world, employees are tasked with scanning individual boarding passes while passengers idly wait,” Talpur observed. “Automated boarding control provides airports with an opportunity to speed up the boarding process by deploying two to three speed gates in the boarding area to automate this process. In an industry where on-time departures are essential, any acceleration in boarding could potentially save millions of dollars each year.”

But if automation delivers so many advantages, why haven’t frequent flyers seen it deployed on a wider scale? A number of factors are inhibiting adoption.

“The airport environment is complex, and in most instances it takes years of planning and construction to roll out a solution that offers such radical changes,” Talpur said. “Automated boarding control won’t happen overnight. However, a snowball effect is inevitable as passengers and airport personnel become accustomed to working with the technology.”

To date, automated boarding control gates have been more prevalent in Europe than the United States.

“Many of Europe’s airports operate as for-profit businesses and are thus incentivized to cut costs and improve the traveler experience to keep passengers traveling and spending money in the airport,” Talpur noted. “Furthermore, in the United States, government agencies such as the Transportation Security Administration and the U.S. Customs and Border Protection play a significant role in airport safety and security. New technologies are required to go through rigorous processes and approvals before deployment, which creates hurdles for suppliers looking to sell product into U.S. airports.”

Pedestrian entrance control manufacturers that are not prepared with products that can serve this industry will have a steep hill to climb should they look to pursue opportunities within airports in the future. Being first to market with an approved, reliable product will be critical to success.

- Edited by CFE Media. See more automation-related research.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
Strategic outsourcing delivers efficiency; Sleeve bearing clearance; Causes of water hammer; Improve air quality; Maintenance safety; GAMS preview
World-class maintenance: The three keys to success - Deploy people, process and technology; 2016 Lubrication Guide; Why hydraulic systems get hot
Flexible offshore fire protection; Big Data's impact on operations; Bridging the skills gap; Identifying security risks
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me