Motors: Stainless steel helical and helical bevel gear reducers

SEW-Eurodrive gives food processors an alternative to single worm gears.



SEW Eurodrive stainless steel bevel gear reducers
SEW-Eurodrive announces the RESF37 stainless steel helical gear reducer and KESA37 stainless steel helical bevel gear reducer. Helical and helical bevel gearing units reportedly use less energy, run cooler and last longer than typical single-worm gear units. The material, design and smooth finish are designed to deliver high resistance to bacteria, chemicals and processes common to the food processing industry.

Traditional single-worm reducers commonly found on processing equipment can be inefficient and can wear over time. Helical bevel gears have "an infinite life," according to an SEW Eurodrive spokesman, and are 50% more efficient than single worm gears. Also, "while the new stainless steel speed reducers are new on the outside, inside users will find the same high-quality gearing the industry has relied on for decades," according to the spokesman.

The shaft-mounted gear units are available with TorqLOC, the company's compact keyless hollow shaft mounting system. TorqLOC combines interchangeable bronze bushings and a stainless steel clamping ring for mounting onto various sized solid shafts. This eliminates the need for high tolerance machining of the shaft, and ensures the reducer can be easily removed even after years of service in the harshest environments.

The RESF37 and KESA37 are available with NEMA C-face motor adapters, IEC adapters or as gearmotors. Other options include seals to provide IP69K protection and food grade oil. All shafts and hardware are high quality stainless steel as standard. Units are available with ratios up to 134.82 and 106.38:1 respectively. Both have an input power rating of up to 3 HP and an output torque rating of 1,770 lb-in.

Separately, SEW-Eurodrive offers a free, on-demand webinar, " The Truth About Energy-Efficient Motors ." Do energy-efficient motors really provide the energy savings everyone anticipates? Find out about research that shows that drivetrain efficiency is just as important as motor efficiency.

- Edited by Renee Robbins, senior editor
Control Engineering News Desk
Machine Control, Motion Control news from Control Engineering

No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2013 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
A cool solution: Collaboration, chemistry leads to foundry coat product development; See the 2015 Product of the Year Finalists
Raising the standard: What's new with NFPA 70E; A global view of manufacturing; Maintenance data; Fit bearings properly
Sister act: Building on their father's legacy, a new generation moves Bales Metal Surface Solutions forward; Meet the 2015 Engineering Leaders Under 40
Cyber security cost-efficient for industrial control systems; Extracting full value from operational data; Managing cyber security risks
Drilling for Big Data: Managing the flow of information; Big data drilldown series: Challenge and opportunity; OT to IT: Creating a circle of improvement; Industry loses best workers, again
Pipeline vulnerabilities? Securing hydrocarbon transit; Predictive analytics hit the mainstream; Dirty pipelines decrease flow, production—pig your line; Ensuring pipeline physical and cyber security
Upgrading secondary control systems; Keeping enclosures conditioned; Diagnostics increase equipment uptime; Mechatronics simplifies machine design
Designing positive-energy buildings; Ensuring power quality; Complying with NFPA 110; Minimizing arc flash hazards
Building high availability into industrial computers; Of key metrics and myth busting; The truth about five common VFD myths

Annual Salary Survey

After almost a decade of uncertainty, the confidence of plant floor managers is soaring. Even with a number of challenges and while implementing new technologies, there is a renewed sense of optimism among plant managers about their business and their future.

The respondents to the 2014 Plant Engineering Salary Survey come from throughout the U.S. and serve a variety of industries, but they are uniform in their optimism about manufacturing. This year’s survey found 79% consider manufacturing a secure career. That’s up from 75% in 2013 and significantly higher than the 63% figure when Plant Engineering first started asking that question a decade ago.

Read more: 2014 Salary Survey: Confidence rises amid the challenges

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.