Motor Summit 2010 just around the corner

Motor Summit 2010 will convene in Zurich, Switzerland, Oct. 26-28, 2010, bringing together experts from research, government, and the private sector with the intent of supporting various ongoing processes in IEA’s new Implementing Agreement 4E.

10/08/2010


More efficient use of energy is a requirement to sustain the development of modern economies and societies. Electric motors and motor systems in industrial and infrastructure applications—along with myriad pumps, fans, and compressors in buildings—are said to account for 40% of the world’s total electricity consumption. Yet it’s within the potential of new and existing technologies to substantially reduce the energy demand of these motor systems worldwide and within practical payback periods. The catch is to overcome market barriers.

Motor Summit 2010 will convene for the purpose of providing an international forum to debate relevant motor system efficiency issues in Zurich, Switzerland, Oct. 26-28, 2010. The agenda will focus on the latest technological innovations, current state of market penetration, as well as strategies and actions needed to overcome barriers that hinder widespread use of highly efficient motor systems. Organizers and sponsors of Motor Summit 2010 are The Swiss Agency for Efficient Energy Use (S.A.F.E.), in collaboration with the Electric Motor Systems Annex of the International Energy Agency’s Efficient Electrical End-Use Equipment program (IEA 4E EMSA) and the national SwissEnergy program.

Following on traditions of prior summits in `07 and ’08, this third Motor Summit will bring together experts from research, government, and the private sector with the intent of supporting various ongoing processes in IEA’s new Implementing Agreement 4E, namely:

  • European Union’s Energy-using Products Ecodesign Directive;
  • Harmonized IEC motor testing and energy classification standards; and
  • NEMA Premium Motors MEPS (minimum efficiency performance standard), which is set to become U.S. law in 2011.

Summit segments will consist of “International strategy day” on Oct. 27, “Swiss implementation day” on Oct. 28, and two EMSA workshops at the same location:

  • IEA 4E: Testing Centers, on Oct. 26; and
  • New Motor Technology, on Oct. 28.

As of early October, some 130 participants from 19 countries are scheduled to attend the event. Control Engineering was a participant at Motor Summit 2008 (see related articles).


- Frank J. Bartos, P.E., is a Control Engineering consulting editor. Reach him at braunbart@sbcglobal.net.

For more information, visit

www.motorsummit.ch

Related articles

Motor Summit 2008 advances energy-efficiency efforts

European motor efficiency developments

 



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
2017 Lubrication Guide; Software tools; Microgrids and energy strategies; Use robots effectively
Prescriptive maintenance; Hannover Messe 2017 recap; Reduce welding errors
Safety standards and electrical test instruments; Product of the Year winners; Easy and safe electrical design
Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Diagnostic functions for system safety; Specifying industrial enclosures; Effective decision support for a crisis
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Natural gas for tomorrow's fleets; Colleges and universities moving to CHP; Power and steam and frozen foods

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Featured articles highlight technologies that enable the Industrial Internet of Things, IIoT-related products and strategies to get data more easily to the user.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me