Motion control: Statue of Liberty rescue elevator

Application Update: At the Statue of Liberty, the new fast, efficient rescue elevator features a smooth ride to the top, ensured by a motor drive, to improve safety, emergency access, and evacuation for the crown jewel of U.S. statues and tourist destinations.


A major renovation to the interior of the Statue of Liberty, equally important in the likely increase in daily visits to the crown, is a sophisticated rescue elevator, manufactured by Tower Elevator Systems Inc. (TESI). The elevator shaft shows compact deSuperstorm Sandy damage to the base has been repaired, and the Statue of Liberty reopened July 4. It was closed since November 2012.

A $30 million Statue of Liberty renovation, for the interior of the copper statue and its concrete and granite pedestal, was completed in October 2012, in the time for the monument’s 126th anniversary. Included were “Life and Safety Upgrades” conducted by the National Park Service (NPS), such as three new elevators, upgraded stairs from the top of the pedestal to the crown, upgrades to the bathrooms and fire suppression systems, and new mechanical and electrical systems for climate control in certain high-traffic areas.

Liberty Island, the home of the Statue of Liberty in the New York Harbor, hosts approximately 3.5 million visitors in a typical year. Open every day except Christmas, the statue is one of the most recognizable icons in the world, and the national park in which it resides is a genuine U.S. “bucket list” tourist destination.

For the first time, people in wheelchairs or with accessibility needs are able to visit one of the observation decks at the top of the pedestal, and general traffic flow and visitor amenities have been improved. A NPS official estimated that the renovations will allow 26,000 more people to visit the interior of the monument annually.

More crown visitors

Of the thousands of people who visit the monument each day, only a small portion venture to the top of the crown. Reservations have been limited to three groups of 10 guests per hour, a total of 240 guests in the eight-hour visiting day. Tickets to the crown are often sold out months in advance, and guests are required to climb 393 steps from the top of the pedestal to the crown.

Statue of Liberty rescue elevator was tested at the TESI plant in Round Rock, Texas, prior to shipping and installation to New York City. The elevator has spring set, electrically released fail-safe motor brakes, which act in normal operation more as parkRenovations include upgrades to the stair rails and protective glass on the spiral staircases, intertwined in a double-helix configuration, that lead guests to and from the crown. This upgrade will likely increase daily access to the crown once the monument is reopened again. (The statue was opened only briefly after the renovations were completed, having been closed again after the island access docks and walkways were damaged by Hurricane Sandy. A reopening date had not been set as of early March.)

Another major renovation to the interior of the statue, equally important in the likely increase in daily visits to the crown, is a sophisticated rescue elevator manufactured by Tower Elevator Systems Inc. (TESI). TESI is an Austin, Texas, manufacturer of special use, custom designed, rack-and-pinion elevators, with installations in mines, steel mills, power plants, airports, and manufacturing facilities.

Rescue and maintenance design

The rescue elevator is used for emergency personnel and maintenance activities, and is the only elevator installed inside the statue, traveling from the top of the pedestal to the crown. It is installed adjacent to the spiral staircases, allowing emergency personnel to reach distressed visitors at four intervals along the route. With a carrying capacity of three people, the rescue elevator provides a much-enhanced safety feature, allowing a visitor to be transported safely to the main elevator for complete egress from the monument without having to navigate the tight and crowded stairs. The TESI elevator replaces an obsolete elevator that had been in place for over 30 years for the same purpose.

“One of the major challenges of the project was the incredibly tight space inside the statue and the nature of working in a historical structure,” said Todd Grovatt, TESI president. “It required a highly innovative and customized design, making sure the system attached to the exact same points as the old elevator, with no modifications to the historically protected interior statue structure. Our rack-and-pinion technology allows the flexibility for an elevator to be placed just about anywhere you can mount the hoistway gear rack. The rescue elevator was custom designed specifically for this application and location. It is the only elevator of its kind in the world.”

See additional photos, application information, and links next page.

<< First < Previous 1 2 Next > Last >>

Anonymous , 03/27/13 01:57 AM:

Good idea.
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Safety for 18 years, warehouse maintenance tips, Ethernet and the IIoT, GAMS 2016 recap
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
Strategic outsourcing delivers efficiency; Sleeve bearing clearance; Causes of water hammer; Improve air quality; Maintenance safety; GAMS preview
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
Safety at every angle, Big Data's impact on operations, bridging the skills gap
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me