Minnesota manufacturers confident, but concerned about worker shortage

Manufacturers in Minnesota remain confident in their firms' future going forward, but they remain mixed about an overall economic expansion and are worried about available qualified workers and health care.

02/21/2012


Minnesota’s manufacturers remain confident in their firms’ futures, as solid revenue, profitability and capital expenditure projections hold steady for the second year in a row, according to The State of Manufacturing, a major survey research project sponsored by Enterprise Minnesota and partners.

From a financial perspective, 82% of executives say they are confident about the future of their firms. This high confidence level is remarkably consistent with data from 2011’s survey, and spreads across companies of all sizes, locations and revenues.

However, there are some signs that last year’s optimism has subsided a bit. When asked whether they anticipate an economic expansion, a flat economy or a recession, 32% of executives say they expect an economic expansion, down from 40% in 2011. Meanwhile, the percentage of executives who anticipate a flat economy has increased from 49% in 2011 to 55% in 2012.

On key projections for their own firms, executives continue to exhibit much more confidence than they did three years ago, when 32% of executives expected their gross revenues to decline, 34% expected their profitability to decline, and more than one in three (37%) expected their capital expenditures to decrease. This year, only 8% of executives anticipate a decline in gross revenues, and only 13% expect a decline in profitability. Less than one in four (24%) executives expect their capital expenditures to decrease.

However, projections on these three indices are less rosy now than they were a year ago. Where 51% of executives anticipated an uptick in gross revenues and 32 anticipated an increase in capital expenditures in 2011, 47% anticipate increased gross revenues and 27% expect an increase in capital expenditures in 2012. The starkest contrast is seen in profitability projections. While 39% of executives expected their firm’s profitability to increase in 2011, only 31% expect it to increase in 2012.

“The value of manufacturing to a healthy economy cannot be stated strongly enough,” said Enterprise Minnesota President and CEO Bob Kill. “We saw manufacturing lead the way through the economic recovery in 2011 and the 2012 State of Manufacturing poll results validate that. Through innovation and investment, Minnesota manufacturers are growing, and they are adding high quality jobs.”

Other results:

Health care dominates concerns: For the fourth year in a row, health care remains by far the top concern among a list of 11 different factors. Almost seven out of 10 (68%) manufacturing executives now say the cost of health care coverage is a concern for their firm. Health care also rises to the top of the list when it comes to important factors for recruitment. Fully 50% of executives report that affordable health care is an important factor in attracting workers to their firm, up 11%age points from our first survey four years ago. Interestingly, the importance of salary and wage expectations as a recruitment factor has decreased over time: where 43% of executives ranked it as important in 2009, only 22% of executives feel the same way in this year’s survey.

Qualified worker shortage: Though it ranked fourth on manufacturing executives’ collective list of concerns, worry over finding qualified workers has doubled over the past year. Thirty-one percent of executives say this issue is a concern for their firm, up from 14% in 2011. Firms of larger size and revenue are most likely to rate this as a concern.

Executives’ own experiences with recruitment echo their worries on the issue. Nearly six out of 10 (58%) executives say it is a challenge to attract qualified labor to their companies. This is a noticeable increase from 2011, when 45% reported difficulty in attracting qualified labor. The majority of firms across all sizes and locations appear to share this challenge. However, it is the larger companies in terms of revenue (more than $1 million) and size (more than 50 employees) that say it will affect their bottom line. These larger firms are also more likely to have added to their workforce over the past year. It appears that companies going through the hiring process are the most likely to report difficulty in and concern over recruiting qualified talent.

Shipping more internationally: The state’s manufacturing industry has hit a new high in the percentage of companies who say they ship internationally. Fully 47% of manufacturing executives now say their firm ships outside the U.S. Nearly one in five respondents (18%) says their firm ships more than 11% of its product overseas. Just three years ago, only 10% of manufacturers reported doing so. Of those who do export, nearly one-quarter (22%) report they are exporting more than they did one year ago.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2013 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Leaders Under 40 program features outstanding young people who are making a difference in manufacturing. View the 2013 Leaders here.
The new control room: It's got all the bells and whistles - and alarms, too; Remote maintenance; Specifying VFDs
2014 forecast issue: To serve and to manufacture - Veterans will bring skill and discipline to the plant floor if we can find a way to get them there.
2013 Top Plant: Lincoln Electric Company, Cleveland, Ohio
Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Plant Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.

Bring focus to PLC programming: 5 things to avoid in putting your system together; Managing the DCS upgrade; PLM upgrade: a step-by-step approach
Balancing the bagging triangle; PID tuning improves process efficiency; Standardizing control room HMIs
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software

Annual Salary Survey

Participate in the 2013 Salary Survey

In a year when manufacturing continued to lead the economic rebound, it makes sense that plant manager bonuses rebounded. Plant Engineering’s annual Salary Survey shows both wages and bonuses rose in 2012 after a retreat the year before.

Average salary across all job titles for plant floor management rose 3.5% to $95,446, and bonus compensation jumped to $15,162, a 4.2% increase from the 2010 level and double the 2011 total, which showed a sharp drop in bonus.

2012 Salary Survey Analysis

2012 Salary Survey Results

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.