Metalforming business on the rise

PMA report shows an order spike is on the horizon.


According to the January 2012 Precision Metalforming Association (PMA) Business Conditions Report, metalforming companies predict improved business conditions during the next three months. Conducted monthly, the report is an economic indicator for manufacturing, sampling 132 metalforming companies in the United States and Canada.

The January report shows that 41% of participants expect economic activity to improve during the next three months (up from 33% in December 2011), 54% predict that activity will remain unchanged (compared to 57% last month) and only 5% report that activity will decline (down from 10% in December).

Metalforming companies also expect a spike in incoming orders during the next three months, with 51% anticipating an increase in orders (up from 40% in December), 40% forecasting no change (compared to 48% last month) and only 9% predicting a decrease in orders (down from 12% in December).

Average daily shipping levels improved in January. Thirty percent of participants report that shipping levels are above levels of three months ago (up from 25% in December), 48% report that shipping levels are the same as three months ago (compared to 44% last month), and 22% report a decrease in shipping levels (compared to 31% in December).

The percentage of metalforming companies with a portion of their workforce on short time or layoff remained unchanged at 12% from December 2011 to January 2012. The percentage matches data reported one year ago, in January 2011.

“The metalforming industry continues to exhibit a positive outlook for 2012, despite the uncertainties created by the lack of political willpower in Washington, D.C., in Congress and the Administration, to address fundamental issues such as taxes, labor law changes and a wide range of growing regulatory obstacles that impact manufacturing,” said William E. Gaskin, PMA president. “Data from PMA’s 2011 Orders and Shipments Survey peg 2011 calendar year growth for new orders at 8 percent vs. 2010, with shipments up year-over-year by 11 percent compared to 2010. Based on PMA’s January Business Conditions Report, the first quarter of 2012 will provide a strong start to the year, consistent with the underlying strength in manufacturing which is helping to lead a slow, steady economic recovery.”

The monthly Business Conditions Report has been conducted by PMA since 1979. Full report results are available at

No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2013 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
A cool solution: Collaboration, chemistry leads to foundry coat product development; See the 2015 Product of the Year Finalists
Raising the standard: What's new with NFPA 70E; A global view of manufacturing; Maintenance data; Fit bearings properly
Sister act: Building on their father's legacy, a new generation moves Bales Metal Surface Solutions forward; Meet the 2015 Engineering Leaders Under 40
Cyber security cost-efficient for industrial control systems; Extracting full value from operational data; Managing cyber security risks
Drilling for Big Data: Managing the flow of information; Big data drilldown series: Challenge and opportunity; OT to IT: Creating a circle of improvement; Industry loses best workers, again
Pipeline vulnerabilities? Securing hydrocarbon transit; Predictive analytics hit the mainstream; Dirty pipelines decrease flow, production—pig your line; Ensuring pipeline physical and cyber security
Upgrading secondary control systems; Keeping enclosures conditioned; Diagnostics increase equipment uptime; Mechatronics simplifies machine design
Designing positive-energy buildings; Ensuring power quality; Complying with NFPA 110; Minimizing arc flash hazards
Building high availability into industrial computers; Of key metrics and myth busting; The truth about five common VFD myths

Annual Salary Survey

After almost a decade of uncertainty, the confidence of plant floor managers is soaring. Even with a number of challenges and while implementing new technologies, there is a renewed sense of optimism among plant managers about their business and their future.

The respondents to the 2014 Plant Engineering Salary Survey come from throughout the U.S. and serve a variety of industries, but they are uniform in their optimism about manufacturing. This year’s survey found 79% consider manufacturing a secure career. That’s up from 75% in 2013 and significantly higher than the 63% figure when Plant Engineering first started asking that question a decade ago.

Read more: 2014 Salary Survey: Confidence rises amid the challenges

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.