Manufacturing technology use jumps 83% in 2010

AMT/AMTDA survey shows October purchases more than doubled from 2009 period.

12/13/2010


October U.S. manufacturing technology consumption totaled $387.13 million, according to AMT - The Association For Manufacturing Technology and AMTDA, the American Machine Tool Distributors’ Association. This total, as reported by companies participating in the USMTC program, was down 2.5% from September but up 154.9% when compared with the total of $151.86 million reported for October 2009. With a year-to-date total of $2,477.06 million, 2010 is up 83.2% compared with 2009.

These numbers and all data in this report are based on the totals of actual data reported by companies participating in the USMTC program.

“Never in the history of the USMTC have we seen a post-IMTS October rival September so closely,” noted Douglas K. Woods, President of AMT. “Increased Sec. 179 expensing and 50% bonus depreciation enacted in late September helped offset the declines we normally see after a show. Looking ahead, enactment of the pending tax package would give U.S. manufacturers a big boost heading into the New Year.”

The United States Manufacturing Technology Consumption (USMTC) report, jointly compiled by the two trade associations representing the production and distribution of manufacturing technology, provides regional and national U.S. consumption data of domestic and imported machine tools and related equipment. Analysis of manufacturing technology consumption provides a reliable leading economic indicator as manufacturing industries invest in capital metalworking equipment to increase capacity and improve productivity.

U.S. manufacturing technology consumption is also reported on a regional basis for five geographic breakdowns of the United States.

Northeast Region

With a total of $97.59 million, October Northeast Region manufacturing technology consumption was up 51.0% when compared with September’s $64.62 million and up 277.5% when compared with October a year ago. At $461.40 million, 2010 year-to-date was 75.9% higher than the comparable figure a year ago.

Southern Region

Manufacturing technology consumption in the Southern Region in October stood at $40.01 million, 40.2% less than September’s $66.92 million but 84.3% more than the October 2009 total. The year-to-date total of $349.01 million was 86.3% above the comparable figure for 2009.

Midwest Region

October manufacturing technology consumption in the Midwest Region totaled $116.66 million, down 3.3% when compared with the $120.67 million total for September but up 147.5% when compared with October a year ago. The $746.43 million 2010 year-to-date total was 92.2% higher than the total for the same period last year.

Central Region

At $92.45 million, October manufacturing technology consumption in the Central Region was 18.7% less than September’s $113.72 million but up 167.7% when compared with last October. The $651.50 million 2010 year-to-date total was 101.2% above the 2009 total at the same time.

Western Region

Manufacturing technology consumption in the Western Region in October stood at $40.41 million, 29.4% higher than the September total of $31.24 million and 78.6% higher than the total for October 2009. With a year-to-date total of $268.73 million, 2010 was up 40.9% when compared with 2009 at the same time.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
World-class maintenance: The three keys to success - Deploy people, process and technology; 2016 Lubrication Guide; Why hydraulic systems get hot
Your leaks start here: Take a disciplined approach with your hydraulic system; U.S. presence at Hannover Messe a rousing success
Hannover Messe 2016: Taking hold of the future - Partner Country status spotlights U.S. manufacturing; Honoring manufacturing excellence: The 2015 Product of the Year Winners
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Digital oilfields: Integrated HMI/SCADA systems enable smarter data acquisition; Real-world impact of simulation; Electric actuator technology prospers in production fields
Improving flowmeter calibration; Selecting flowmeters for natural gas; Case study: Streamlining assembly systems using PC-based control; CLPM: Improving process efficiency, throughput
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Warehouse winter comfort: The HTHV solution; Cooling with natural gas; Plastics industry booming

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me