Manufacturing centers to focus on digital design, metal alloys

Obama to announce Feb. 25 that Chicago and Detroit won the bidding to host the public-private partnerships for manufacturing innovation

02/24/2014


The expected announcement Tuesday of two manufacturing innovation institutes in Chicago and Detroit will continue the Obama Administration’s emphasis on high-tech manufacturing while creating a public-private partnership to deliver funding and existing technology.

White House officials were quoted as saying the partnership allows funding for “key technology areas that encourage investment and production in the U.S."

After a 10-month competition among cities to provide a home for these high-tech centers, Detroit’s manufacturing innovation center will focus on developing lightweight allows and metals, while the Chicago innovation center will focus on digital manufacturing. Each center is being funded with $70 million in Department of Defense funding and $70 from private corporations.

Among the companies mentioned in news reports as being part of these private funding sources are EWI, an Ohio-based research company in the metals industry for the Detroit project, and companies such as Siemens, Dow Chemical, Lockheed Martin and General Electric for the digital manufacturing center in Chicago.

When the competition for these high tech centers began, White House officials said the centers would “serve as a regional hub designed to bridge the gap between basic research and product development, bringing together companies, universities and community colleges, and Federal agencies to co-invest in technology areas that encourage investment and production in the U.S.”

The first two such facilities already are in motion. In August 2012, Obama announced creation of the National Additive Manufacturing Innovation Institute in Youngstown, Ohio. In January 2014, he announced the creation of a power electronics hub in Raleigh, N.C. funded through the U.S. Department of Energy.

The implications for the innovation centers extend beyond just the manufacturing sector. While the digital manufacturing center “will raise the global competitiveness of U.S. small- and medium-sized manufacturers by smart and comprehensive use of the ‘digital thread’ throughout design, production and support” the Defense Department officials said it will benefit from such a consortium.

“The department requires complex, highly integrated systems to gain technological advantage, but it lacks the open market or volume to push costs or cycle times lower,” officials said in a white paper overview of the plan. It said the digital manufacturing design center would “help drive a paradigm shift in the development, production and sustainability of complex weapons systems by reducing acquisition lead time and costs through the application of digitally networked and synchronized processes and tools.”

For more on each of the innovations centers:

•  Digital Manufacturing and Design Innovation
•  Lightweight and Modern Metals Manufacturing
• Next Generation Power Electronics Manufacturing



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
World-class maintenance: The three keys to success - Deploy people, process and technology; 2016 Lubrication Guide; Why hydraulic systems get hot
Your leaks start here: Take a disciplined approach with your hydraulic system; U.S. presence at Hannover Messe a rousing success
Hannover Messe 2016: Taking hold of the future - Partner Country status spotlights U.S. manufacturing; Honoring manufacturing excellence: The 2015 Product of the Year Winners
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Digital oilfields: Integrated HMI/SCADA systems enable smarter data acquisition; Real-world impact of simulation; Electric actuator technology prospers in production fields
Improving flowmeter calibration; Selecting flowmeters for natural gas; Case study: Streamlining assembly systems using PC-based control; CLPM: Improving process efficiency, throughput
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Warehouse winter comfort: The HTHV solution; Cooling with natural gas; Plastics industry booming

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me