Machine Safety: Networks can enable advancements in machine safety

Networks have seen significant advancements over the past 10 years to include safety certified networks. Have these technological achievements really advanced machine safety?

05/06/2014


Courtesy: Control Engineering Machine Safety Blob, JB TitusNetworks have seen significant advancements over the past 10 years to include safety certified networks. Have these technological achievements really advanced machine safety?

My first response is yes. Because safety certified networks have provided the ability to display fault and status diagnostics which in many cases did not previously exist. Here’s the simple explanation. Safety automation can be described as any combination of safety programmable logic controllers (PLCs), safety inputs, safety outputs, safety rated devices, standard devices applied with redundant application, safety certified software, and a safety certified network. Wow! And, all or part of the aforesaid replaces conventional components and point to point wiring.

Ah ha; this is the key! Replacing electro mechanical components, like safety relays and a lot of hard wiring, opens the door for new diagnostics for existing safety functions. That alone, in my opinion, is an advancement in machine safety. These diagnostics provide key information to personnel for minimal trouble shooting time and to correct unplanned machine downtime issues. The control system can then be reset enabling continued production.

And now the next point. If you can connect the safety related parts of the control system via a safety certified network, you now have a fully integrated safety control system. Some advantages of these systems include built in features like:

1. Watch dog timers

2. Diversity of code

3. Data integrity checks

4. Internal health checks with diagnostics, and

5. Component addresses within the control system.

This last item is critically important because even devices in series can now have a physical address for annunciation and trouble shooting. These are but a few of the features, advantages and benefits that safety certified networks bring to machine safety.

Has this presented you with any new perspectives? Do you have some specific topic or interest that we could cover in future blog posts? Add your comments or thoughts to the discussion by submitting your ideas, experiences, and challenges in the comments section below.

Related articles:

Machine Safety: enhanced safety networks, the Internet of things, and autonomous safety

Machine Safeguarding Solutions, a case study by ARC

Contact: http://www.jbtitus.com for “Solutions for Machine Safety”.



The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
A new approach to the Skills Gap; Community colleges may hold the key for manufacturing; 2017 Engineering Leaders Under 40
Doubling down on digital manufacturing; Data driving predictive maintenance; Electric motors and generators; Rewarding operational improvement
2017 Lubrication Guide; Software tools; Microgrids and energy strategies; Use robots effectively
The cloud, mobility, and remote operations; SCADA and contextual mobility; Custom UPS empowering a secure pipeline
Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Power system design for high-performance buildings; mitigating arc flash hazards
Research team developing Tesla coil designs; Implementing wireless process sensing
Commissioning electrical systems; Designing emergency and standby generator systems; Paralleling switchgear generator systems

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Featured articles highlight technologies that enable the Industrial Internet of Things, IIoT-related products and strategies to get data more easily to the user.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me