Machine Safety: Near-miss events and residual risk

Are near-miss events and residual risk related when it comes to machine safety? Is there a machine guarding requirement specified for near-miss events?

09/11/2013


For machine safety are there any commonalities between near-miss events and residual risk? Do near-miss events have a machine guarding requirement? There is nothing in common. In fact, residual risk is fully covered in standards. I cannot find any standards coverage for near-miss events.

I recently read an article in Professional Safety (May 2013) titled: Near-Miss Reporting, A Missing Link in Safety Culture by Mike Williamsen, Caterpillar Safety Services. Given my background in machine safety and standards this article caused me to think about near-miss accountability and machine guarding. As I look back over time and ask the question, what machine safety standard has provided any guidelines for prevention of near-miss events? In fact, what standard has even mentioned the words – “near-miss”? Due to this absence, does it mean that near-miss events must be considered too vague for machine safety standards or risk assessment standards to provide meaningful guidance? Is near-miss protection for employees totally left up to the mind set of management?

I have looked into this subject and it seems that near-miss protection is left to a company’s “safety culture” as to how well it’s developed and ingrained into the safety practice. So far, I’ve not found a standard that provides any coverage for near-miss events. OSHA, on the other hand, does provide a definition for near-miss events: An event that does not result in an injury or damage. It is important to record and investigate near-misses to identify weaknesses in the safety and SHMS [health management system] that could possibly lead to an injury or damage.

However, aside from calling out the need to have a reporting format to record and elevate near-miss events, there doesn’t seem to be an OSHA regulation establishing requirements or enforcement details.

So, is it correct to assume that a near-miss event practice is to be called out in a company’s safety policy manual for the protection of employees? Or, maybe it’s a requirement for some companies because it’s written into agreements with their union? Yet others may have a near-miss program because of an injury settlement. Is this sounding all too familiar to most of you? Is it only due-diligence?

Can anybody share with us an approved standard or regulation covering near-miss events? And, what about the reporting forms?

Has this presented you with any new perspectives? Add your comments or thoughts to the discussion by submitting your ideas, experiences, and challenges in the comments section below.

 

J.B. Titus, CFSE

Related articles:

ASSE - Professional Safety Journal- Near-Miss Reporting, May 2013

OSHA – search for near miss

Control Engineering article: Process risk assessment uses big data

Contact: http://www.jbtitus.com for “Solutions for Machine Safety”.

 



JON , NV, United States, 09/23/13 08:53 PM:

Our company has used Near-Miss reports for years now. They are filled out and then distributed to the other plants so that they can see if they might have a simular hazard. After the Near-Miss we discuss the potential it has to cause serious harm and create a short term and long term solution. A standard form is used to keep it simple, user friendly, and photos are always attached. But again, to your point, there is no official regulation. Just a strict company policy.
JB , GA, United States, 10/29/13 06:43 AM:

Jon - great to hear that best practices prevail at your Company's safety culture.
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Prescriptive maintenance; Hannover Messe 2017 recap; Reduce welding errors
Safety standards and electrical test instruments; Product of the Year winners; Easy and safe electrical design
Safer human-robot collaboration; 2017 Maintenance Survey; Digital Training; Converting your lighting system
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Big Data and bigger solutions; Tablet technologies; SCADA developments
Automation modernization; Predictive analytics enable open connectivity; System integration success; Automation turns home brewer into brew house
Commissioning electrical systems; Designing emergency and standby generator systems; Paralleling switchgear generator systems
Natural gas for tomorrow's fleets; Colleges and universities moving to CHP; Power and steam and frozen foods

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Featured articles highlight technologies that enable the Industrial Internet of Things, IIoT-related products and strategies to get data more easily to the user.
Compressed air plays a vital role in most manufacturing plants, and availability of compressed air is crucial to a wide variety of operations.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me