Machine Safety: Is upgrading to solid state enough?

Moving machine guarding solutions to solid-state-based components from hard-wired components has been a persistent U.S. discussion since 2002. Are solid-state components enough to provide effective machine safety and personnel safety?

12/03/2012


The overwhelming discussion since 2002 in the U.S. has been about moving machine guarding solutions to solid state based components from hard wired components. To provide effective machine safety and personnel safety – is this enough?

 

It’s been my observation since 2002 that the majority of all the chatter in industry has been focused around promotional campaigns for firmware and software based safety certified products for machine guarding. True, the door opened in the U.S. in 2002 for these products based on the 2002 change in NFPA 79 removing the requirement for all machine guarding devices to be hard wired. This standard also added the requirement that safety rated software and firmware based products used in safety-related functions shall be listed for such use. Naturally these changes fueled the supply channel and listing organizations for these products to launch major go-to-market selling and marketing campaigns. Yet, industry is still required to provide effective machine safety and personnel safety as required by OSHA and the industry standards. Therefore, is migrating your machine safety strategy to solid state enough?

 

In my opinion, and most industry experts in the field, the answer would be definitely not.

 

I’ve got a few reasons as to why migrating to solid state is not enough. And, I’ll bet that you can add several more. To begin with, isn’t upgrading your machine guarding to solid state simply one step any company should consider? Isn’t there a larger question that the supply channel typically doesn’t address in their promotional campaigns, i.e.:

1.    Is your safety culture best-in-class?

2.    Does your line and staff cadre openly accept and encourage change?

3.    Do you have an effective preventative maintenance program in place?

4.    Do your production & maintenance employees feel engaged?

5.    Do your employees take ownership for your machine safety culture?

 

Remember the real organizational gotcha – “we haven’t had an accident for a long time, so we’re safe”?

 

So, what’s your opinion? Is migrating your machine safety strategy to solid state enough?

 

Your comments or suggestion are always welcome so please let us know your thoughts. Submit your ideas, experiences, and challenges on this subject in the comments section below.

 

J.B. Titus, CFSERelated articles:

Machine Guarding & The Hierarchy of Measures for Hazard Mitigation

Machine Safety: Is OSHA okay with my 'acceptable' risk mitigation?

Machine safety: A social responsibility or KPI?

Machine Safety: the myths of safety cultures.

Machine Safety: Updating Minds About Machine Safety

 

Contact: www.jbtitus.com for “Solutions for Machine Safety”.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
World-class maintenance: The three keys to success - Deploy people, process and technology; 2016 Lubrication Guide; Why hydraulic systems get hot
Your leaks start here: Take a disciplined approach with your hydraulic system; U.S. presence at Hannover Messe a rousing success
Hannover Messe 2016: Taking hold of the future - Partner Country status spotlights U.S. manufacturing; Honoring manufacturing excellence: The 2015 Product of the Year Winners
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Digital oilfields: Integrated HMI/SCADA systems enable smarter data acquisition; Real-world impact of simulation; Electric actuator technology prospers in production fields
Improving flowmeter calibration; Selecting flowmeters for natural gas; Case study: Streamlining assembly systems using PC-based control; CLPM: Improving process efficiency, throughput
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Warehouse winter comfort: The HTHV solution; Cooling with natural gas; Plastics industry booming

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me