Machine Safety: How do I know that a consensus standard has been updated?

At almost every Machine Safety Seminar I hear someone ask: “How do I know that a consensus standard has been updated?”

06/15/2012


At almost every Machine Safety Seminar I hear someone ask- “how do I know that a consensus standard has been updated”?

 

Unfortunately, in my opinion, there is no central point that I’ve found where alerts are distributed to a data base of interested parties regarding the availability of updated machine safety standards. This is particularly an issue for the smaller companies that don’t have employees on standards committees or who are not members of advisory boards. But first, understand that consensus standards typically have some convention to declare their revision, such as; NFPA 79, Electrical Standard for Industrial Machinery, 2012 Edition.

 

My recommendation is that every manufacturer should designate someone to keep a list of current active consensus standards. In some cases I’m aware of a “librarian” within a company that has this responsibility as part of their job description. This person could then periodically check out each standard via the internet for the availability of a newer revision.

 

Additionally, some consensus standards bodies allow folks to register for emails on various activities. I would suggest that you go to each standard body (ANSI, NFPA, CSA, RIA, etc.) to see if they have this feature. I have found a few that have this feature but it’s typically offered on a particular consensus standard by standard basis and not on a blanket basis. This could actually be an advantage since most manufacturers have their unique list of standards upon which they base their business. On the other hand you might get more emails then you’re looking for since you only want those related to the revision of a standard.

 

All consensus standards have typical revision cycles of three to five years. I’ve seen quite a few that actually publish future revision target dates on their web sites for a given consensus standard. This could be helpful to establish your own list of future revisions for tracking purposes.

 

The bottom line is that, across the board, there doesn’t appear to be an effective top down alert system for updated consensus standard releases. What I’ve mentioned are some bottom up ideas using the internet and technology to create your own alert system that’s unique to your business.

 

If anyone has some additional ideas or solutions please share them as comments and we’ll gladly post for everyone’s benefit. Simply submit your ideas, experiences, and challenges on this subject in the comments section below. Click on the following text if you don't see a comments box, then scroll down: Machine Safety: How do I know that a consensus standard has been updated?

 

 

 

J.B. Titus, CFSERelated sites:

ANSI – American National Standards Institute

NFPA – National Fire Protection Association

CSA – Canadian Standards Association

RIA - Robotics Industry Association

 

Contact: www.jbtitus.com for “Solutions for Machine Safety”.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Strategic outsourcing delivers efficiency; Sleeve bearing clearance; Causes of water hammer; Improve air quality; Maintenance safety; GAMS preview
World-class maintenance: The three keys to success - Deploy people, process and technology; 2016 Lubrication Guide; Why hydraulic systems get hot
Your leaks start here: Take a disciplined approach with your hydraulic system; U.S. presence at Hannover Messe a rousing success
Flexible offshore fire protection; Big Data's impact on operations; Bridging the skills gap; Identifying security risks
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me