Machine Safety: Has Moore’s Law helped?

Moore’s Law states that the number of transistors on integrated circuits doubles every two years. While many consider this a joke, it’s not far off the mark looking back. Even so, has this rapid advancement in technology played a role in machine safety?


Moore’s Law states that the number of transistors on integrated circuits doubles every two years. While many consider this a joke it’s not far off the mark looking back. Even so, has this rapid advancement in technology played a role in machine safety?

In my opinion the answer is yes.

Machine safety technology adoption, according to J.B. Titus, Control Engineering machine safety blog

To peel this onion you really need to look back to what’s now being called the third Industrial Revolution. This period began around 1970 when electronics entered the world of industrial control systems. Until then most machinery was controlled by electromechanical devices called relays. Now, along comes the first wave of electronic control systems made up of hardware, firmware, and software that would perform the mechanical on/off function of relays automatically. Adoption of these new systems in industry took off like a rocket, even though initially they were very unreliable. Driven by this lack of reliability, safety standards quickly banned these new control systems called PLCs (programmable logic controllers) from any role in machine safety. Therefore, machine safety could only be provided via field devices hard wired to conventional relays (and ultimately safety relays). Machine safety did not enjoy the benefits of Moore’s Law for the next 40 years.

On the other hand, general machine control via PLCs continued its rocket trajectory rapidly gaining reliability, I would argue, largely because of Moore’s Law. As an analogy let’s look at computers. In 1976 the state-of-the-art Cray-1 supercomputer at Oak Ridge National Laboratory (remember the atom bomb) could process 160 million flops (floating-point operations per second) with only 8 MB (megabytes) of memory. Today, according to “Cray,” the Cray XT5 can now perform 1 quadrillion petaflops (10 to the 15th power). This is an incredible advancement in only 35 years. How could Moore’s Law not have been vital to this achievement?

Similarly, by virtue of the advancement in electronic controls technology, their related now stellar reliability, and IEC 61508-1:1997 (Functional safety of electrical/electronic/programmable electronic safety-related systems - Parts 1 through 7) newer PLCs called safety PLCs were brought to market in 2002. IEC 61508 was the design standard for automation supplier companies to follow for producing safety controllers performing safety functions. How could Moore’s Law not have been vital to this achievement, as well?

The application of transistors on integrated circuits certainly applies to both computers and PLCs, which establishes a good argument to answer the lead question – YES! 

Has this presented you with any new perspectives? Do you have some specific topic or interest that we could cover in future blog posts? Add your comments or thoughts to the discussion by submitting your ideas, experiences, and challenges in the comments section below.

Related articles:

Moore’s Law from Wikipedia

How Moore's Law Works by Jonathan Strickland

ASSE - Professional Safety Journal- Near-Miss Reporting, May 2013

OSHA – search for near miss 

Contact: for “Solutions for Machine Safety”.

No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2013 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
A cool solution: Collaboration, chemistry leads to foundry coat product development; See the 2015 Product of the Year Finalists
Raising the standard: What's new with NFPA 70E; A global view of manufacturing; Maintenance data; Fit bearings properly
Sister act: Building on their father's legacy, a new generation moves Bales Metal Surface Solutions forward; Meet the 2015 Engineering Leaders Under 40
Cyber security cost-efficient for industrial control systems; Extracting full value from operational data; Managing cyber security risks
Drilling for Big Data: Managing the flow of information; Big data drilldown series: Challenge and opportunity; OT to IT: Creating a circle of improvement; Industry loses best workers, again
Pipeline vulnerabilities? Securing hydrocarbon transit; Predictive analytics hit the mainstream; Dirty pipelines decrease flow, production—pig your line; Ensuring pipeline physical and cyber security
Upgrading secondary control systems; Keeping enclosures conditioned; Diagnostics increase equipment uptime; Mechatronics simplifies machine design
Designing positive-energy buildings; Ensuring power quality; Complying with NFPA 110; Minimizing arc flash hazards
Building high availability into industrial computers; Of key metrics and myth busting; The truth about five common VFD myths

Annual Salary Survey

After almost a decade of uncertainty, the confidence of plant floor managers is soaring. Even with a number of challenges and while implementing new technologies, there is a renewed sense of optimism among plant managers about their business and their future.

The respondents to the 2014 Plant Engineering Salary Survey come from throughout the U.S. and serve a variety of industries, but they are uniform in their optimism about manufacturing. This year’s survey found 79% consider manufacturing a secure career. That’s up from 75% in 2013 and significantly higher than the 63% figure when Plant Engineering first started asking that question a decade ago.

Read more: 2014 Salary Survey: Confidence rises amid the challenges

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.