Machine Safety: Domestic U.S. versus international standards

For machine safety, who needs to follow OSHA regulations, domestic standards, and various state and local requirements? Are you confused? Explanations follow.


Which machine safety regulations apply in the U.S.?

- Some say that compliance with OSHA regulations and domestic standards plus state and local requirements are the primary responsibilities within the U.S.

- Others say that compliance with OSHA regulations, international standards and a few domestic standards plus state and local requirements are the primary responsibilities within the U.S. 

U.S. and European models of machine safety compliance differ, explains J.B. Titus.Are you confused? Has anybody ever come across a Cliff Notes document that explains the relativity of domestic standards versus international standards for compliance within the U.S.? 

I suspect the answer to this question is probably no, otherwise there would be far less confusion. In my experience there are at least two answers – the simple answer and the murky answer. 

Simple - domestic companies that have all of facilities within the U.S. generally focus at the U.S. domestic standards for compliance. This generally also applies for compliance to machines manufactured for U.S.-based customers. However, machines for export out of the U.S. will likely be required to comply with international standards. This compliance requirement is usually specified in the purchase documentation. 

Murky - Domestic companies that have facilities in the U.S. and international locations often choose to be compliant with the international standards for uniformity. However, the U.S. facilities will often also be compliant to the domestic standards. Their international facilities will likewise usually be compliant with country and local requirements. 

This issue could be somewhat confusing in part because of the enforcement for compliance and inconsistent messaging from suppliers. U.S. domestic suppliers tend to promote the simple message to the market and the larger/international suppliers tend to promote the international (or murky) message. Furthermore, our enforcement model is quite confusing. OSHA is the law and they focus on their 29 CFR Regulations plus reserving the right to reference certain domestic standards. But U.S. enforcement doesn’t end here.

Litigation in court is another form of enforcement following an unfortunate incident or injury. In this playing field both domestic and international standards are used every day by lawyers. They can do this because the U.S. has delegates from industry, organizations, education, and other sectors who participate on the International standards committees representing the U.S. Therefore, lawyers argue that U.S. industry participates in international standards, and that they should also be in compliance with these standards. This often results in a settlement out of court if the international standard has a requirement that could have prevented the incident. 

I hope that helps. So, are you more or less confused now? 

Has this presented you with any new perspectives? Add your comments or thoughts to the discussion by submitting your ideas, experiences, and challenges in the comments section below. 

J.B. Titus, CFSE

Related articles:

Machine safety: Shared responsibility

Inside Machines: Does adopting ISO 13849-1:2006 change the U.S. model for compliance and enforcement?

Machine Safety – does OSHA reference consensus standards for compliance? 

Contact: for “Solutions for Machine Safety”.

No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Safety for 18 years, warehouse maintenance tips, Ethernet and the IIoT, GAMS 2016 recap
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
Strategic outsourcing delivers efficiency; Sleeve bearing clearance; Causes of water hammer; Improve air quality; Maintenance safety; GAMS preview
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
Safety at every angle, Big Data's impact on operations, bridging the skills gap
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me