Machine Safety: Does it matter, the Aggregate Hazard Level for a machine?

When conducting a risk assessment of the machine’s individual identified hazards does the safety level of the complete machine or system matter? Does anyone have a solution for determining the aggregate level of an entire machine? Does anybody care?

03/23/2012


When conducting a risk assessment of the machine’s individual identified hazards does the safety level of the complete machine or system matter? Does anyone have a solution for determining the aggregate level of an entire machine? Does anybody care? 

Safety matters logo.

   Over the past two or three years we’ve engaged in abundant discussions over the increased value of migrating from qualitative measures for machine hazard analysis and mitigation versus quantitative measures. Stage right – enters ISO 13849-1&2 for a comprehensive quantitative approach that analyzes and mitigates machine hazards to acceptable levels. Clients now ask, why does the new more comprehensive approach stop short of determining the aggregate machine level or system level of hazard? Does anyone anywhere roll up the risk analysis to an aggregate level?

   In my opinion, a few disciplines do exactly that!

   Let’s list several disciplines that identify an aggregate risk level:

1. Disaster recovery

2. Environmental polution

3. Information Technology

4. Banking

5. Defense

6. Insurance

... to mention a few

   So, if management in these sectors can get aggregate levels of risk analysis why can’t management of manufacturing operations machinery based? Isn’t it possible for management to know a risk level by machine? Why roll out a quantitative analysis for hazards on and around a machine only for use by the EH&S, engineering, and maintenance personnel. This leaves management thirty years behind with qualitative awareness’s kept in their minds. How about providing management with an aggregate machine hazard level by something like:

1. The value of the highest mitigated hazard, or

2. The summation average of all mitigated hazards, or

3. A proportional average of all mitigated hazards, or

...something else?

   A manager of manufacturing operations should know his aggregate hazard level (SIL, PL, etc.) by machine just like his pier in the IT office? What have you found or what are you using to answer this call? Doesn’t this make sense?

   Your comments or suggestion are always welcome so please let us know your thoughts. Submit your ideas, experiences, and challenges on this subject in the comments section below. Click on the following text if you don't see a comments box, then scroll down: Machine Safety: Does it matter, the Aggregate Hazard Level for a machine?

   Related articles:

Updating Minds About Machine Safety

EN ISO 13849-1, the quantitative approach to machine safety begins with a qualitative process!

How To Integrate Safety

Machine Safety – the myths of safety cultures.

Contact: www.jbtitus.com for “Solutions for Machine Safety”.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2015 Top Plant: Phoenix Contact, Middletown, Pa.; 2015 Best Practices: Automation, Electrical Safety, Electrical Systems, Pneumatics, Material Handling, Mechanical Systems
A cool solution: Collaboration, chemistry leads to foundry coat product development; See the 2015 Product of the Year Finalists
Raising the standard: What's new with NFPA 70E; A global view of manufacturing; Maintenance data; Fit bearings properly
Special report: U.S. natural gas; LNG transport technologies evolve to meet market demand; Understanding new methane regulations; Predictive maintenance for gas pipeline compressors
Cyber security cost-efficient for industrial control systems; Extracting full value from operational data; Managing cyber security risks
Drilling for Big Data: Managing the flow of information; Big data drilldown series: Challenge and opportunity; OT to IT: Creating a circle of improvement; Industry loses best workers, again
Migrating industrial networks; Tracking HMI advances; Making the right automation changes
Understanding transfer switch operation; Coordinating protective devices; Analyzing NEC 2014 changes; Cooling data centers
Upgrading secondary control systems; Keeping enclosures conditioned; Diagnostics increase equipment uptime; Mechatronics simplifies machine design

Annual Salary Survey

After almost a decade of uncertainty, the confidence of plant floor managers is soaring. Even with a number of challenges and while implementing new technologies, there is a renewed sense of optimism among plant managers about their business and their future.

The respondents to the 2014 Plant Engineering Salary Survey come from throughout the U.S. and serve a variety of industries, but they are uniform in their optimism about manufacturing. This year’s survey found 79% consider manufacturing a secure career. That’s up from 75% in 2013 and significantly higher than the 63% figure when Plant Engineering first started asking that question a decade ago.

Read more: 2014 Salary Survey: Confidence rises amid the challenges

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.