Machine Safety and Lockout/Tagout

Lockout/tagout (LOTO) standard is an OSHA regulation for machine functional safety that establishes employer responsibility to protect employees from hazardous energy sources on machines and equipment during service and/or maintenance. OSHA says ...

01/06/2011


DANGER - This energy source has been locked out - proper machine safety methods save life and limb, says the Control Engineering Machine Safety blog.The lockout/tagout (LOTO) standard is an OSHA regulation for machine safety that establishes employer responsibility to protect employees from hazardous energy sources on machines and equipment during service and/or maintenance. According to OSHA, “Approximately 3 million workers service equipment and face the greatest risk of injury if lockout/tagout is not properly implemented. Compliance with the lockout/tagout standard (29 CFR 1910.147) prevents an estimated 120 fatalities and 50,000 injuries each year.” Every machine safety standard I’ve ever reviewed or helped to write has either normatively or informatively referenced this OSHA regulation. Since its inception, LOTO has changed very little with the exception that just a few years ago OSHA  provided abbreviated requirements when conducting “minor maintenance” such as cleanup. Additionally, I can’t recall any company’s Safety Policy manual that did not call out requirements for LOTO.

J.B. Titus, machine safety bloggerSo, with all this said, why is LOTO always on OSHA’s top ten list of safety citations or a topic of concern or discussion throughout industry here in the U.S.? It’s my opinion that this phenomena occurs because LOTO a procedure vs a built in (designed in) solution for machine guarding. Since LOTO is a maintenance procedure it’s also a key performance item built into the “safety culture” of each company. Therefore, the effectiveness of compliance with LOTO is a direct result of the strength and effectiveness of any company’s safety culture. And, as we all know, safety cultures vary considerably from company to company.

A new question also recently arises questioning if LOTO is still only procedural? It seems this question comes about as a result of the combined innovation of “safety automation” and the functional safety provisions of IEC 62061 and ISO 13849-1. With the application of safety PLC’s, safety drives, safe motion, and many more…….comments have come from manufacturing asking if these safety solutions have isolated some of the hazardous energy sources on a machine when the safety system shuts the machine down?

What is your opinion? Will safety automation lead to modifications in the LOTO procedure? Submit your ideas, experiences, and challenges on this subject in the comments section below. Click on the following text if you don't see a comments box, then scroll down: Machine Safey & Lockout/Tagout comments and questions.

Related articles:

Machine Safety And Your Safety Culture

OSHA Fact Sheet on Lockout/Tagout (PDF)

Control of Hazardous Energy (Lockout/Tagout)

Contact: www.jbtitus.com for “Solutions for Machine Safety”.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
World-class manufacturing: A recipe for success: Finding the right mix for a salad dressing line; 2015 Salary Survey: Manufacturing slump dims enthusiasm
2015 Top Plant: Phoenix Contact, Middletown, Pa.; 2015 Best Practices: Automation, Electrical Safety, Electrical Systems, Pneumatics, Material Handling, Mechanical Systems
A cool solution: Collaboration, chemistry leads to foundry coat product development; See the 2015 Product of the Year Finalists
Digital oilfields: Integrated HMI/SCADA systems enable smarter data acquisition; Real-world impact of simulation; Electric actuator technology prospers in production fields
Special report: U.S. natural gas; LNG transport technologies evolve to meet market demand; Understanding new methane regulations; Predictive maintenance for gas pipeline compressors
Cyber security cost-efficient for industrial control systems; Extracting full value from operational data; Managing cyber security risks
Getting ready for industrial IoT; Visualizing the (applied) automation continuum; Preventing VFD faults and failures; Using wireless for closed-loop applications
Migrating industrial networks; Tracking HMI advances; Making the right automation changes
Understanding transfer switch operation; Coordinating protective devices; Analyzing NEC 2014 changes; Cooling data centers

Annual Salary Survey

After almost a decade of uncertainty, the confidence of plant floor managers is soaring. Even with a number of challenges and while implementing new technologies, there is a renewed sense of optimism among plant managers about their business and their future.

The respondents to the 2014 Plant Engineering Salary Survey come from throughout the U.S. and serve a variety of industries, but they are uniform in their optimism about manufacturing. This year’s survey found 79% consider manufacturing a secure career. That’s up from 75% in 2013 and significantly higher than the 63% figure when Plant Engineering first started asking that question a decade ago.

Read more: 2014 Salary Survey: Confidence rises amid the challenges

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.