Machine Safety: an automatic sequencer does what?

In the world of machine control and machine safety, to really appreciate where we are today, don’t we need to have a reasonable understanding of where we’ve come from?


In the world of machine control and machine safety, to really appreciate where we are today, don’t we need to have a reasonable understanding of where we’ve come from?

I’m one of the few people active today in industry that witnessed the installation of PLC 1’s in an automotive plant in Ohio. This was actually two plants in one on the Lake Erie shore that produced sixty automobiles and 30 light trucks per shift hour six days a week. As a young engineer in 1968 I was totally amazed at how the complicated machinery, conveyors, and multiple systems would all simultaneously start at 6:00 am. Every control system was hard wired and software was nowhere to be seen on the factory floor.

Yet, also in 1968, a small band of Detroit engineers at General Motors Hydra-matic were looking for a standard machine controller. They wanted a programmable standard control system that would replace all the electro-mechanical (relay) panels and direct wiring. They prepared bid specs and recruited four companies: Allen-Bradley, Digital Equipment Corp. (DEC), Modicon and Century Detroit. Alas – this was the beginning of what we now call Programmable Logic Controllers (PLCs). And, in the early 1970’s when several PLC’s arrived at our automotive plant the maintenance staff first called them automatic sequencers because they did what relays did automatically. This is intentionally a very brief history of the development of PLC technology for machine control. Yet, in comparing PLC machine control technology from its meager beginning over four decades ago to the vast level of technology available today one can easily understand how we became the industrial leaders we are today. And most recently, machine safety / guarding has joined (I say, re-joined) the machine control automation architecture. This fact alone is a complete story still unfolding.

So, today we see an abundance of articles on safety communication systems, safe wireless, safe motion control,……..and more. All of which when properly applied can improve OEE and potentially lead to a new competitive advantage for your business.

Thank you – Automatic Sequencers!

Your comments or suggestion are always welcome so please let us know your thoughts. Submit your ideas, experiences, and challenges on this subject in the comments section below. Click on the following text if you don't see a comments box, then scroll down: Machine Safety: automatic sequencers do what?


Related articles:

Rockwell Automation (Allen-Bradley) – 1995 – PLC 25 Years

The History of the PLC, by Dick Morley     

The Birth of the PLC

Contact: for “Solutions for Machine Safety”.

No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2013 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
A cool solution: Collaboration, chemistry leads to foundry coat product development; See the 2015 Product of the Year Finalists
Raising the standard: What's new with NFPA 70E; A global view of manufacturing; Maintenance data; Fit bearings properly
Sister act: Building on their father's legacy, a new generation moves Bales Metal Surface Solutions forward; Meet the 2015 Engineering Leaders Under 40
Cyber security cost-efficient for industrial control systems; Extracting full value from operational data; Managing cyber security risks
Drilling for Big Data: Managing the flow of information; Big data drilldown series: Challenge and opportunity; OT to IT: Creating a circle of improvement; Industry loses best workers, again
Pipeline vulnerabilities? Securing hydrocarbon transit; Predictive analytics hit the mainstream; Dirty pipelines decrease flow, production—pig your line; Ensuring pipeline physical and cyber security
Upgrading secondary control systems; Keeping enclosures conditioned; Diagnostics increase equipment uptime; Mechatronics simplifies machine design
Designing positive-energy buildings; Ensuring power quality; Complying with NFPA 110; Minimizing arc flash hazards
Building high availability into industrial computers; Of key metrics and myth busting; The truth about five common VFD myths

Annual Salary Survey

After almost a decade of uncertainty, the confidence of plant floor managers is soaring. Even with a number of challenges and while implementing new technologies, there is a renewed sense of optimism among plant managers about their business and their future.

The respondents to the 2014 Plant Engineering Salary Survey come from throughout the U.S. and serve a variety of industries, but they are uniform in their optimism about manufacturing. This year’s survey found 79% consider manufacturing a secure career. That’s up from 75% in 2013 and significantly higher than the 63% figure when Plant Engineering first started asking that question a decade ago.

Read more: 2014 Salary Survey: Confidence rises amid the challenges

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.