Lunchtime project for automation and control engineers

This LeaveMeAloneBox is made of LEGOS. Making one of these (Legos or otherwise) might be a fun lunchtime project for automation and control engineers... before next Halloween? See video.


Clockwork LEGO LeaveMeAloneBox, a good for-fun automation project?I saw one of these years ago, around Halloween, on the receptionist's desk at a company I was visiting.  There it was, a tiny shiny black plastic box, not connected to anything.  The unmarked toggle switch was inviting just anyone to flip the switch.  The receptionist was pretending that she did not notice the torment that the presence of the box was causing each of us.

What was the purpose of this box?  Why is the switch unmarked?  Why is it sitting out where just anyone waiting in the lobby could flip the switch? Was it safe to do that?  Who put it there?  Is it a toy?  Is it a Halloween prank?  Who among us is bold enough to just flip the switch and see what happens?

While the debate continued in each of our heads, one among us stepped up to the receptionist’s desk and flipped the switch.  She looked up from her work and smiled so it must have been OK.  The box made the sound of a small high-speed motor and gear train at work, it rumbled a bit and then part of the box opened slowly and a plastic doll arm slowly reached out toward the switch.  By that time we were all crowded around the machine watching it intently as the hand slowly returned the toggle switch to the off position...  then suddenly snapped shut. 

Since everything up until that point had been in slow motion, its sudden rapid movement and loud sound as it snapped shut startled all of us enough that we each made a small jump back from the machine. 

Over the years, I have searched novelty shops for one of these and not found one.

Now through the wonder of the Internet I have discovered a wealth of information about "LeaveMeAloneBoxes.”  Maybe you would be up to the challenge of building one of these yourself - to amaze and astound your friends and co-workers?

Ever see one of these? Send me a photo of yours, and some info, if you build one.

Leave a comment about the LeaveMeAloneBox below - click the link if you don't see the comment area.


Paul F. Grayson - Chief Engineer, AMERICAN INDUSTRIAL MAGIC, LLC

"Small engine and machinery repair" TC TINKERS 4-H ROBOT CLUB

"Science, Engineering, and Technology" 390 4-Mile Rd. S., Traverse City, MI 49685 AIM:

TC Tinkers 4-H Robot Club:

Control Engineering blogs

Free 4-H club news letter:

No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2013 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
A cool solution: Collaboration, chemistry leads to foundry coat product development; See the 2015 Product of the Year Finalists
Raising the standard: What's new with NFPA 70E; A global view of manufacturing; Maintenance data; Fit bearings properly
Sister act: Building on their father's legacy, a new generation moves Bales Metal Surface Solutions forward; Meet the 2015 Engineering Leaders Under 40
Cyber security cost-efficient for industrial control systems; Extracting full value from operational data; Managing cyber security risks
Drilling for Big Data: Managing the flow of information; Big data drilldown series: Challenge and opportunity; OT to IT: Creating a circle of improvement; Industry loses best workers, again
Pipeline vulnerabilities? Securing hydrocarbon transit; Predictive analytics hit the mainstream; Dirty pipelines decrease flow, production—pig your line; Ensuring pipeline physical and cyber security
Upgrading secondary control systems; Keeping enclosures conditioned; Diagnostics increase equipment uptime; Mechatronics simplifies machine design
Designing positive-energy buildings; Ensuring power quality; Complying with NFPA 110; Minimizing arc flash hazards
Building high availability into industrial computers; Of key metrics and myth busting; The truth about five common VFD myths

Annual Salary Survey

After almost a decade of uncertainty, the confidence of plant floor managers is soaring. Even with a number of challenges and while implementing new technologies, there is a renewed sense of optimism among plant managers about their business and their future.

The respondents to the 2014 Plant Engineering Salary Survey come from throughout the U.S. and serve a variety of industries, but they are uniform in their optimism about manufacturing. This year’s survey found 79% consider manufacturing a secure career. That’s up from 75% in 2013 and significantly higher than the 63% figure when Plant Engineering first started asking that question a decade ago.

Read more: 2014 Salary Survey: Confidence rises amid the challenges

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.