Linear position sensors gain acceptance

Linear variable differential transformers (LVDT) can deliver better machine operation.

04/16/2014


Figure 1: The basic LVDT design. Courtesy: Macro SensorsToday's industrial process control applications increasingly use automated systems to optimize operations and ensure a safer, more productive process. Linear position sensors used in these automated systems provide highly accurate feedback on product parameters, control states, and outputs to machine controllers.

Whether implemented as a stand-alone component or as part of a control or safety system, the linear position sensor, also often known as an LVDT, is capable of providing linear displacement measurements from micro inches to several feet, under various operating and environmental conditions with high accuracy and reliability. Essentially, the LVDT linear position sensor plays an important role in machine control by providing feedback about product location. To some extent, it is the LVDT linear position sensor that ensures proper machine operation.

Mechanics of an LVDT

In basic terms, an LVDT linear position sensor is an electromechanical device that converts linear position or motion to a proportional electrical output (see figure 1). More specifically, the LVDT position sensor produces an electrical output signal directly proportional to the displacement of a separate movable core. Typically, the ferrous core within the LVDT is attached to the moving element on the piece of equipment requiring position feedback.

The basic LVDT design consists of three elements:

  1. One primary winding
  2. Two identical secondary windings
  3. A movable magnetic armature or "core."

The primary winding is excited with an ac supply generating a magnetic field which, when the core is placed in the central or "null" position, includes equal voltages in both of the secondaries. The secondaries are wired series opposed so that their combined output represents the difference in voltage indicated in them, which in this case is zero. As the core is moved left or right, the difference in inducted voltages produces an output that is linearly proportional in magnitude to the displacement of the core. Its phase changes 180-deg from one side of the null position to the other.

In the oil & gas industry, compact LVDTs are used in the position feedback control of down-hole drilling equipment such as bore scopes that measure the ID of the drilled hole. The sensor coil assembly and separable core inherent to the technology can withstand extremely high pressures of the environment as the mechanical configuration of the coil assembly is vented (pressure balanced) to the pressure of the nonconductive mediums. As the sensor coil assembly can withstand a combination of high pressure, elevated temperatures, shock, and vibration, the LVDT is able to make measurements in down-hole drilling equipment possible where space is at a premium and the environment is hostile.

In operation, the LVDT's primary winding is energized by alternating current of appropriate amplitude and frequency, known as the primary excitation. The LVDT linear position sensors' electrical output signal is the differential ac voltage between two secondary windings, which varies with the axial position of the core within the LVDT coil. Usually this ac output voltage is converted by suitable electronic circuitry to high-level dc voltage or current for convenient use by a computer or other digital output device.

Because there is normally no contact between the LVDT's core and coil structure, no parts can rub together or wear out. This means that an LVDT linear position sensor features unlimited mechanical life. This factor is highly desirable in many industrial process control and factory automation systems.

Enhanced use in process control

Recent innovations in construction materials, manufacturing techniques, and low-cost microelectronics have revolutionized the LVDT linear position sensors into a more reliable and cost-effective technology for process control applications. In the past, electronics necessary to operate LVDT linear position sensors properly were complicated and expensive, prohibiting their wide use in process control applications for displacement measurement.

Modern ASIC and microprocessors give LVDT technology more complex processing functions and enable signal conditioning within the sensor housing so LVDTs generate digital outputs directly compatible with computer-based systems and standardized digital buses. As a result, today's linear position sensors can provide more accurate and precise measurement of dimensions in a wider variety of quality control, inspection equipment, and industrial metrology applications including online parts inspection, servo-loop positioning systems, and manufacturing process control.

For applications where sensors must operate in extreme environments, the sensing element can be segregated from the electronic circuitry, unlike capacitive, magnetostrictive, and other high-frequency technologies. Connected by long cables up to 31 meters (100 ft), ac-operated LVDTs can work with remotely located electronics that power the sensors, and amplify and demodulate their output. Output is, then, displayed on a suitable readout and/or inputted into a computer-based data acquisition system for statistical process control. This ability to transmit data to a remote computer has made linear position sensors popular in quality assurance schemes.


<< First < Previous 1 2 Next > Last >>

No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2013 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
The true cost of lubrication: Three keys to consider when evaluating oils; Plant Engineering Lubrication Guide; 11 ways to protect bearing assets; Is lubrication part of your KPIs?
Contract maintenance: 5 ways to keep things humming while keeping an eye on costs; Pneumatic systems; Energy monitoring; The sixth 'S' is safety
Transport your data: Supply chain information critical to operational excellence; High-voltage faults; Portable cooling; Safety automation isn't automatic
Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Plant Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.

Maintaining low data center PUE; Using eco mode in UPS systems; Commissioning electrical and power systems; Exploring dc power distribution alternatives
Synchronizing industrial Ethernet networks; Selecting protocol conversion gateways; Integrating HMIs with PLCs and PACs
Why manufacturers need to see energy in a different light: Current approaches to energy management yield quick savings, but leave plant managers searching for ways of improving on those early gains.

Annual Salary Survey

Participate in the 2013 Salary Survey

In a year when manufacturing continued to lead the economic rebound, it makes sense that plant manager bonuses rebounded. Plant Engineering’s annual Salary Survey shows both wages and bonuses rose in 2012 after a retreat the year before.

Average salary across all job titles for plant floor management rose 3.5% to $95,446, and bonus compensation jumped to $15,162, a 4.2% increase from the 2010 level and double the 2011 total, which showed a sharp drop in bonus.

2012 Salary Survey Analysis

2012 Salary Survey Results

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.