Line scan camera has 16k resolution, fast througput

Dalsa Corporation has introduced the Piranha3 16k metal oxide semiconductor (CMOS) line scan camera. This high-speed model features 16k resolution with a 3.5 µm pixel size and a 70 kHz line rate for ultra-fast 1146 Mpixels/s throughput

12/08/2010


Dalsa Corporation has introduced the Piranha3 16k complementary metal oxide semiconductor (CMOS) line scan camera. This high-speed model features 16k resolution with a 3.5 µm pixel size and a 70 kHz line rate for ultra-fast 1146 Mpixels/s throughput – surpassing both the resolution and the throughput of any previous Dalsa line scan camera.

The Piranha3 16k camera delivers unprecedented speed with low noise and high dynamic range. It is ideally suited for the inspection of large area flat-panel displays and printed circuit boards, along with high performance document scanning and other high throughput applications. The new Piranha3 16k delivers unrivalled precision and speed within a compact form factor of 150 x 80 x 77 mm.

“The Piranha3 16k camera delivers unparalleled performance using Dalsa’s own CMOS sensor architecture,” said Dalsa senior product manager Xing-Fei He. “Combined with our new high speed interface, we are able to meet the market’s increasing demand for higher resolutions and speeds using a single, extended cable solution in a low cost package.”

To deliver its full bandwidth, the Piranha3 16k high speed uses the new Dalsa HSLink machine vision connectivity interface. HSLink takes the key strengths of Camera Link, adds new features and functions, and combines them with scalable bandwidth in 300 megabyte/second steps (from 300 to 6000 megabytes/second) and uses globally available, off-the-shelf components.

The Piranha3 16k camera is supported by Dalsa’s Xcelera-HS PX8 frame grabber.  The Xcelera-HS PX8 also leverages the interface to deliver image acquisition bandwidth of 1.8 gigabytes/second and host transfer bandwidth of 2 gigabytes/second over multiple-lane PCI Express implementations.

Software Advantage

Piranha cameras are supported by Dalsa’s Sapera vision software. This core development platform includes over 400 image processing primitive and industrial strength image analysis tools, such as pattern finding, 1D and 2D barcode and OCR tools for part identification and detection, color processing tool, separation and measurement applications, blob analysis tool and inspection metrology tool for real-world dimensional measurements.

Key features and benefits:

  • High resolution 16,384 pixels with 3.5 x 3.5 µm pixel size
  • Dalsa’s own CMOS image sensor technology
  • High speed, 70 kHz line rate for 1146 MPixels/s throughput
  • On-chip CDS and ADC
  • High speed interface - next generation interface for data transfer (HSLink)
  • Camera configuration parameters that are all software controllable, including flat field correction, exposure control, and gain and offset control
  • More detail with fewer cameras in a multi-camera system for measurable cost savings
  • Delivers Dalsa’s lowest price per pixel system solution

www.dalsa.com

Dalsa Corporation

- Edited by Amanda McLeman, Control Engineering, www.controleng.com



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2016 Product of the Year; Diagnose bearing failures; Asset performance management; Testing dust collector performance measures
Safety for 18 years, warehouse maintenance tips, Ethernet and the IIoT, GAMS 2016 recap
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
Safety at every angle, Big Data's impact on operations, bridging the skills gap
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me