Labor supply, demand bring changes to China manufacturing industries

Control Engineering International: Robotics and other automation are seen as competitive opportunities as labor costs increase in China, according to Control Engineering China.

05/31/2013


In some factories in China, industrial robots are replacing humans in repetitive and high-strength work, helping with increasing labor costs in China industrial markets. Courtesy: Control Engineering ChinaOne of the reasons China has become a manufacturing power is that China's manufacturing enterprises can benefit from abundant labor resources and low labor costs. At present, with the approaching end of the “demographic dividend” in China, this situation appears ready to change. Labor supply and demand are changing manufacturing enterprises in China.

In the past two years, a tighter labor market has markedly increased labor wages in China, especially in some manufacturing-intensive areas, such as the Pearl River Delta and the Yangtze River Delta. Despite raising pay at an annual average rate of 10%, some factories still find recruitment difficult.

Automation fills the gap

Many manufacturing facilities are exploring new measures to offset recruitment challenges. These include changing modes of employment (such outsourcing factory positions or functions) and using new equipment or technologies for manufacturing. These measures reduce dependence on permanent employees.

Some decision makers also have been increasing the amount of automation used in their factories. For example, a textile processing factory in Suzhou, Kiangsu province, set up an automated stereoscopic warehouse system, using an information system to control inventory, taking the place of manual work in stowage and cargo management.

The factory director said he followed the example of another factory in the same industry. The purchase of the system has significantly improved efficiency. In the warehouse, the system helped reduce labor costs and the number of errors in quantity of goods transferred, previously checked by warehouse workers and transport drivers.

Robots improve safety, quality

In some other factories, industrial robots have taken the place of humans to deal with some repetitive and high-strength work. Robotic applications, previously used primarily for automobile manufacturing in China, are expanding into other industries. An obvious example is Foxconn, one of the largest electronic manufacturing groups. Foxconn said it will add a large number of industrial robots into its production lines in China.

Generally speaking, challenges often create opportunities. Changes brought by labor supply and demand may be a new driving force to develop Chinese manufacturing industries, and we also will be happy to see Chinese workers getting more value from their hard work.

- Henry Qiao is an editor, Control Engineering China. Translation from a recent edition of CE China edited by Mark T. Hoske, content manager, CFE Media, Control Engineering, mhoske@cfemedia.com.

Consider this

Chinese manufacturers apply robotics and other automation to help with labor shortages; do hazardous, repetitive, dangerous work; and improve quality. Are you optimizing robotics and other automation?

ONLINE

www.cechina.cn 

See other Control  Engineering International articles.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
2017 Lubrication Guide; Software tools; Microgrids and energy strategies; Use robots effectively
Prescriptive maintenance; Hannover Messe 2017 recap; Reduce welding errors
Safety standards and electrical test instruments; Product of the Year winners; Easy and safe electrical design
Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Diagnostic functions for system safety; Specifying industrial enclosures; Effective decision support for a crisis
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Natural gas for tomorrow's fleets; Colleges and universities moving to CHP; Power and steam and frozen foods

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Featured articles highlight technologies that enable the Industrial Internet of Things, IIoT-related products and strategies to get data more easily to the user.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me