Iran fires up nuke plant, connects to grid

If you think nuclear plant construction here is slow, Iran’s pace is glacial but after 35 years has finally come full term.

09/06/2011


Iran has finally entered the atomic age, publically at least, as its one and only more-or-less finished nuclear power plant connects to the grid. The Bushehr (strictly peaceful) nuclear power plant is about 750 miles south of Tehran on the Persian Gulf, and is a 1,000 MW, (presently) single unit facility. Originally the plan was to have four units on this site, but as of now the plan has been pulled back to three, which may still be wishful thinking. There have been many premature reports that it is just about ready to go online any minute now, but this time it looks like it’s legit, running at low power and ramping up to hit 40% of total output by next week.

   Construction on this plant began in 1975 led by Siemens and a group of other German companies back when the Shah was still in power. (Raise your hand if you’re old enough to remember the Shah.) Apparently he was looking ahead to the time when oil would be too expensive for use as a fuel, and had plans to build 23,000 MW of nuclear generating capacity. Things ground to a halt after the revolution in 1979. Siemens and its syndicate abandoned the project leaving two units under construction. Things sat quietly corroding in the hot salty air by the gulf, with occasional bombing damage during the Iran-Iraq war in the mid-1980s.

   The Iranians brought in a Russian group to start construction again in the mid-1990s, and work started slowly with the expectation of completion by 2001. The site quickly became a hodge-podge of equipment as Atomstroyexport decided to use its reactor design along with some of the remaining Siemens equipment. The international community in general wasn’t excited about the prospects, and Russia was having its own internal problems during that time, so it all got pretty complicated politically. Still, negotiations continued, and by 2005, the U.S. withdrew its official opposition to the project and things were stable enough with the Russians for things to begin again in earnest. Now it’s ready to go.

   While I think nuclear power is a pretty good idea in most situations, this one seems a little scary. Let’s accept for the sake of argument that this facility does not offer support for Iran’s desire to create weapons-grade nuclear material. We’ll also assume that Russian operators and trainers are on site to keep things on an even keel, running a Soviet-era reactor design. It still gives me the heebie geebies. This is just one more reason I’m glad I don’t live over there.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Safer human-robot collaboration; 2017 Maintenance Survey; Digital Training; Converting your lighting system
IIoT grows up; Six ways to lower IIoT costs; Six mobile safety strategies; 2017 Salary Survey
2016 Top Plant; 2016 Best Practices on manufacturing progress, efficiency, safety
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Big Data and bigger solutions; Tablet technologies; SCADA developments
Automation modernization; Predictive analytics enable open connectivity; System integration success; Automation turns home brewer into brew house
Commissioning electrical systems; Designing emergency and standby generator systems; Paralleling switchgear generator systems
Natural gas for tomorrow's fleets; Colleges and universities moving to CHP; Power and steam and frozen foods

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Motion control advances and solutions can help with machine control, automated control on assembly lines, integration of robotics and automation, and machine safety.
Compressed air plays a vital role in most manufacturing plants, and availability of compressed air is crucial to a wide variety of operations.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
click me