IO module replacement advice: Consider legacy connections, Ethernet, peer-to-peer

I/O wiring can be among the most challenging (and perhaps feared) of upgrades. When replacing input/output connections, what are key considerations? Daniel Liu, business development manager, data acquisition and control, Moxa Technologies Inc., offered answers to some key questions.

10/20/2011


The history of I/O wiring can be divided into three phases.

Moxa ioLogik E4200 Modular Ethernet Remote IO adaptor. Courtesy: Moxa TechnologiesIn the first phase when remote I/O products were not available, all I/O contacts needed to homerun all wires back to where the controller was located. As running cables can be costly and troublesome, PLC or controller manufacturers began to use different vendor-defined protocols, or fieldbus networks, to develop remote I/O technology. In this way, less cabling infrastructure was required since only one set of wires (such as Ethernet or serial) was required to homerun to the controller, as compared to multiple wires from each I/O contact in a traditional I/O deployment.

A more recent development in remote I/O technology corresponds to the advent of Ethernet in automation applications. Running a fieldbus protocol over Ethernet makes it more convenient to build just one Ethernet infrastructure and use Ethernet switches to extend the reach of the remote I/O (as compared to serial-to-Ethernet infrastructure). This use of Ethernet infrastructure provides a substantial benefit, reducing cabling costs.

As Ethernet becomes more of a standard in the remote automation space, new I/O installations will need to be integrated with older systems that may still be using serial-based remote I/O technology, or are running hard wiring from the I/O contacts to the I/O controller (an extremely traditional deployment of I/O). To upgrade the older system and reduce cabling infrastructure, one technique is to use TCP/IP, so the operator can enable peer-to-peer communications between two remote I/O connections to replicate the I/O signal over an IP-based network.

For example, Moxa’s ioLogik E1200 series modules are designed to be used as a remote I/O as well as the cable replacement solution. The modules enable the capture of digital and analog signals and then translate those signals into TCP/IP packets. They then send the TCP/IP packet through the network and reproduce the digital and analog signal at the other end.

This gives I/O module replacement a tremendous advantage in that now the I/O signal can run through any type of IP-based network, including wireless. (Despite wireless applications for remote I/O, this technology is still considered premature as IEEE 802.11 technologies used for simple data acquisition applications are considered an alternative to wired remote I/O solutions.) In conclusion, peer-to-peer communication provides the operator with the ability to seamlessly integrate I/O connections to the Ethernet network, thereby saving time and money. Building unnecessary cabling infrastructure becomes a practice of the past.

Moxa provides additional help on cable replacement in remote I/O applications. http://www.moxa.com/Event/Net/2010/Peer-to-Peer_Remote_IO/index.htm 

- Daniel Liu is business development manager, data acquisition and control, Moxa Technologies Inc. Edited by Mark T. Hoske, CFE Media, Control Engineering, www.controleng.com.

www.moxa.com 



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
2017 Lubrication Guide; Software tools; Microgrids and energy strategies; Use robots effectively
Prescriptive maintenance; Hannover Messe 2017 recap; Reduce welding errors
Safety standards and electrical test instruments; Product of the Year winners; Easy and safe electrical design
Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Diagnostic functions for system safety; Specifying industrial enclosures; Effective decision support for a crisis
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Natural gas for tomorrow's fleets; Colleges and universities moving to CHP; Power and steam and frozen foods

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Featured articles highlight technologies that enable the Industrial Internet of Things, IIoT-related products and strategies to get data more easily to the user.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me