Integrated programming environment includes drive programming software

The most significant improvement to drive programming is the move to centralized programming platforms that cover an entire automated system rather than learning separate programming software only for drive programming.

08/03/2012


Beckhoff Automation drives include AX5203, AX5118, and AX5125, all with connectivity to the EtherCAT industrial Ethernet protocol. Courtesy: Beckhoff AutomationPerhaps the most significant improvement to drive programming is the move to centralized programming platforms that cover an entire automated system over software packages that are dedicated to drive programming. With this modern approach, engineers can program programmable logic controllers (PLCs), I/O devices, motion control, and drive functionality in one place with one software platform. This can greatly reduce costs because users reduce the number of software packages they must purchase, license, and learn. Savings also extend to engineers with decreased programming time and training requirements.

The benefits here aren’t just related to the programming and software, but also to the cumbersome cables still required by some dedicated drive programming environments. A centralized automation programming platform that uses standardized hardware components, such as Ethernet-enabled drives, can eliminate special adapters and cables for programming and configuring drives. Specialized equipment is still a common requirement with many drives on the market. These special cable components are not especially expensive, but they can cause massive headaches if a replacement cable or cable adapter is required in drive fault, machine-down situations.

TwinCAT software from Beckhoff Automation is an integrated programming environment for drive programming and other industrial devices. It works with multiple vendors’ hardware. Courtesy: Beckhoff AutomationOf course, centralized programming environments for drives and all other automation devices on a machine is not a new idea. The integrated programming approach has been around for over 15 years. However, many more machine builders and manufacturers are embracing this way of programming every year. Using a comprehensive PC-based software platform, users can program drives as one part of the overall automation system instead of having to program them individually with a separate software platform.

Some software automatically identifies devices on digital fieldbuses (such as the EtherCAT industrial Ethernet protocol), including servo drives from multiple vendors.

This adds another layer of time savings for engineers, which then translates into faster design times, more efficient commissioning, and faster time to market for machine builders and their customers. The all-in-one software platform permits the tuning of drives and other automation devices in the same system manager. The integrated software includes the possibility to program advanced motion functionality with specific libraries devoted to numerical control (NC), computer numerical control (CNC), drive safety, and additional areas. Significant drive programming efficiencies can be created for any kind of drive application from simple to complex.

For product details, read: Drive programming software is an integrated programming environment.

- Matt Lecheler is motion specialist at Beckhoff Automation; edited by Mark T. Hoske, content manager CFE Media, Control Engineering, Plant Engineering, and Consulting-Specifying Engineer, mhoske@cfemedia.com

ONLINE

www.beckhoff.com/twincat 

www.beckhoff.com/drivetechnology  



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
World-class maintenance: The three keys to success - Deploy people, process and technology; 2016 Lubrication Guide; Why hydraulic systems get hot
Your leaks start here: Take a disciplined approach with your hydraulic system; U.S. presence at Hannover Messe a rousing success
Hannover Messe 2016: Taking hold of the future - Partner Country status spotlights U.S. manufacturing; Honoring manufacturing excellence: The 2015 Product of the Year Winners
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Digital oilfields: Integrated HMI/SCADA systems enable smarter data acquisition; Real-world impact of simulation; Electric actuator technology prospers in production fields
Improving flowmeter calibration; Selecting flowmeters for natural gas; Case study: Streamlining assembly systems using PC-based control; CLPM: Improving process efficiency, throughput
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Warehouse winter comfort: The HTHV solution; Cooling with natural gas; Plastics industry booming

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me