Inside Machines: Automated measuring system

New control system for an automated measuring system testing improves communications and saves space.

09/02/2011


The VMT industrial computer and meters are in place and ready to be tested in the new Ford Meter Box system. Photo courtesy: Phoenix ContactFord Meter Box Company Inc., in Wabash, Ind., upgraded its automated measurement system for water meter testing. The company manufactures waterworks brass valves and fittings, water meter setting equipment, and water meter testing equipment.

The new system ensures that end users of water systems receive accurate bills for water usage, so the water utility can accurately measure all water produced. Since a water meter is the water utility’s cash register, accurate results are crucial.

The first generation of this system used a Linux-based controller and custom-manufactured console cabinet linked to the meter test bench through a series of control cables tethered to the console as it was moved from test station to test station. If technical support was necessary, the test bench operator had to describe the screen display to customer support personnel. The support person would instruct the operator how to proceed.

Controllers in the first-generation system were becoming outdated. If Ford Meter Box wanted to continue using the system, the entire program would need to be rewritten. Eric Cohee, senior product designer for Ford Meter Box Co., felt the time had come to develop a second generation of the system.

The new system needed to improve programming, a challenge because end customers use a broad range of computer systems. A universal, easily adaptable data transfer would facilitate customers’ various needs.

Additionally, space for the test equipment is typically limited. Test bench operators needed a more compact console or even the complete elimination of the console.

The controller also needed to withstand the repetitive tests that the company conducts. Thorough testing ensures that Ford Meter Box’s products will stand up to real-world challenges.

Ford Meter Box Company worked with a system integrator/distributor and automation vendor to develop a new testing system. The new system used an Ethernet-enabled programmable logic controller (PLC), an industrial PC, a security device, Ethernet switch, power supply, PLC relays, and miscellaneous cables, connectors, and terminal blocks.

“Although a workable system was developed early in the project, we still wanted to simplify the operation for our customers,” stated Cohee. Project partners “supported our requests and continued to work alongside us to improve the operation of our test equipment by providing additional hardware, technical support, and software solutions.”

The industrial PC serves as the main operator interface for the meter test equipment, collecting and storing meter test data and eliminating the need for the console.

Ford Meter Box test system data entry can be done on the touchscreen of the machine-mount VMT industrial computer. Graphical screens were created with the VISU+ HMI software. Photo courtesy: Phoenix Contact

By mounting the industrial PC “directly to the meter test bench, we were able to reduce the floor space required by our console 100 percent. The compact size of the controller allowed more functionality in a smaller package,” Cohee said. Since the industrial PC is 24 V dc, it also eliminated a potential shock hazard associated with a 120 V ac system.

The controllers use an IEC 61131 programming system. Cohee said, “By using the IEC61131 universal programming languages and functions, we will be able to upgrade our hardware more easily as controllers advance in technology.”

Cohee said that the controllers also proved durable. “Because the controllers have held up to our extreme tests in the lab, we are confident that they will also last for many years as the primary controller on the meter testing equipment we manufacture.”

The security device provides secure virtual private network (VPN) capabilities, allowing customers to easily and securely interface meter test equipment within their network, and Ford Meter Box Company can assist with equipment operation through a secure Internet connection. 

Use of preassembled cables and the wiring interface adapter and cable system simplified the assembly process. Cohee stated, “Our process quality has improved by significantly reducing the possibility of wiring errors during production of the meter test bench. Although some of the hardware items actually increased in cost, we achieved an overall cost savings with the plug-and-play ability of the components and pre-made cables.”

Control box for the Ford Meter Box application includes ILC programmable controller, modular I/O, systems cabling, and power distribution module. Photo courtesy: Phoenix ContactCohee said it was an advantage to have single sourcing for “controllers, computers, power equipment, relays, Ethernet switch and, of course, connectors and cables,” ensuring component compatibility on the water meter test equipment. Replacement parts, if needed, are easily available in the U.S. and globally.

The new system offered “customers additional features at the same relative cost, while simplifying the set-up and testing of water meters,” Cohee said.

www.fordmeterbox.com

www.neffengineering.com

www.phoenixcontact.com/usa


ONLINE extra

Ford Meter Box system components, development partners

Ford Meter Box Company worked with Neff Engineering and Phoenix Contact to develop a new testing system. Jane Pozek (industrial sales engineer for Phoenix Contact) and Eric Cohee (senior product designer for Ford Meter Box Company) review the machine design. Photo courtesy: Phoenix Contact

  • The new system used the Phoenix Contact ILC 150 ETH PLC, Vehicle Mount Terminal (VMT) industrial PC, FL mGuard security device, SFN Ethernet Switch, Qunit SFB power supply, PLC relays, and miscellaneous cables, connectors, and terminal blocks.
  • VMT and ILC 150 use the PCWorx IEC 61131 programming system.
  • Phoenix Contact also introduced Ford Meter Box Company to the FL mGuard security device, which provides secure virtual private network (VPN) capabilities
  • Varioface wiring interface adapter and cable system simplified the assembly process.

Control Engineering webcasts include more on Ethernet optimization.

http://www.controleng.com/media-library/webcasts.html



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
Strategic outsourcing delivers efficiency; Sleeve bearing clearance; Causes of water hammer; Improve air quality; Maintenance safety; GAMS preview
World-class maintenance: The three keys to success - Deploy people, process and technology; 2016 Lubrication Guide; Why hydraulic systems get hot
Flexible offshore fire protection; Big Data's impact on operations; Bridging the skills gap; Identifying security risks
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me