Insertion flowmeter offers more power for users

ABB AquaProbe insertion flowmeter is available with mains, battery, and renewable power sources.

05/06/2012


ABB’s Measurement Products’ business announces enhancements to its AquaProbe insertion electromagnetic flowmeter range with additional power source and transmitter options. The enhancements make it ideal for clean water applications whether they be existing permanent or temporary installations. Designed to work with both WaterMaster and AquaMaster 3 transmitters, the enhanced AquaProbe offers a wide choice of power solutions including main-and battery-power options, plus an all-new renewable power version which can draw power from either solar or wind-power.


AquaProbe flowmeter, Courtesy: ABBThe manufacturers, ABB Measurement Products, see this new extension to the AquaProbe range as representing a major step forward for insertion flowmeter capability. The key lies in the incorporation of the high-specification transmitter from ABB's WaterMaster range. The AquaProbe with WaterMaster transmitter is available with 4-20 mA with HART protocol or Profibus DP. In the field, WaterMaster transmitters incorporate many operator focused features. The backlit, graphical display can easily be rotated without the need for any tools, allowing field teams to customize the display that best fits their needs. "Through the glass" control allows local operator interface to input short, quick data for all user specific parameters.

Installing the AquaProbe is made simple by its use of ABB's "fit and flow" intelligent installation technology. With this technology AquaProbe eliminates the need to match flow sensor and transmitter in the field. On initial installation, the self-configuration sequence automatically replicates into the transmitter all calibration factors, meter size and serial numbers as well as site-specific settings, eliminating the opportunity for error.

AquaProbe is fully submersible with IP68/NEMA 6P protection rating and the absence of any moving parts results in increased reliability and reduced maintenance with no impact on performance. AquaProbe can be used on pipe sizes from 200 to 8000 mm (8 to 315 in.), the transmitter being mounted either locally or up to 200 m (650 ft) remote from the probe to facilitate ease of reading.

With the flexibility of the AquaProbe sensor, AquaProbe with AquaMaster 3 (FEA200) can be permanently installed as a monitoring device for economic management of the water supply, or used as a portable site survey tool to check for leaks or to identify hydraulic problems in the existing network.

A simple dc (6-21 V) connection can be hooked up to sources as small as a 5 W solar panel or 60 W equivalent wind supply. When coupled with its use of super capacitor energy storage technology, this feature totally eliminates the need for either mains or battery power, making AquaProbe with AquaMaster 3 transmitter suitable for use in even the remotest locations. In the mains-power mode of AquaProbe with AquaMaster 3, the SuperCap technology maintains continuous measurement and alarms reporting via SMS for up to 5 days in the event of a power failure. This is expanded to up to 3 weeks for the renewable power mode, with the SuperCap also acting to power the meter during the night.

A new development in the battery-only version of the AquaProbe with AquaMaster 3 is the option of an Alkaline-Manganese Dioxide Battery pack, offering an operating life of up to 5 years in standard applications. The new AquaProbe offers competitive features and benefits surpassing competitors at every stage of the process. The new design raises the bar to the next level for all clean water applications.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
2017 Lubrication Guide; Software tools; Microgrids and energy strategies; Use robots effectively
Prescriptive maintenance; Hannover Messe 2017 recap; Reduce welding errors
Safety standards and electrical test instruments; Product of the Year winners; Easy and safe electrical design
Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Diagnostic functions for system safety; Specifying industrial enclosures; Effective decision support for a crisis
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Natural gas for tomorrow's fleets; Colleges and universities moving to CHP; Power and steam and frozen foods

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Featured articles highlight technologies that enable the Industrial Internet of Things, IIoT-related products and strategies to get data more easily to the user.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me