Industrial Ethernet protocols international market rankings

According to a recent study, Powerlink and Profinet are among the most used industrial Ethernet protocols for transferring machine and sensor data in true real-time.


Powerlink and Profinet are industrial Ethernet protocols for transferring machine and sensor data in true real-time. According to a recent study conducted by the independent market research institute IMS Research, Powerlink now holds eleven percent of the international market for industrial Ethernet systems. This places Powerlink in fourth place overall, following EtherNet/IP, Profinet and Modbus TCP/IP; although EtherNet/IP and Modbus TCP/IP are not suited for high-speed drive control.

Furthermore, the Profinet market share of 28% cited in the study subsumes all versions of Profinet, a large portion of which being non real-time capable versions of the Siemens protocol. Stefan Schönegger, Business Manager for Open Automation Technologies at B+R, sees many factors behind Powerlink's success: "When B+R released the Powerlink specification, it was the first real-time protocol that was capable of achieving communication cycles in the microsecond range. This met a newly emerging demand in industrial applications, which led to rapid growth of the new protocol. Additional advantages included its ability to be used on equipment from any manufacturer, its basis in the Ethernet standard and its broad range of performance: Powerlink allows the creation of complete application structures from the drive to the control level, integrating all conceivable network components. Furthermore, heterogeneous network architectures can be implemented with other higher or lower level communication systems."

Background behind the study:

The report "The World Market for Industrial Ethernet - 2009 Edition" by the independent UK-based research organization, IMS Research, contains data about the total quantity of installed Ethernet nodes. The analyses are divided into regions, product groups and industries. According to the study, EtherNet/IP has the largest market share with 30%, followed closely by Profinet with 28%. Modbus TCP/IP is used in 22% of the applications and Powerlink in 11%. All other systems together make up for the remaining 9%. The data was collected using the sales figures for devices from 16 representative groups of industrial commodities.


- Edited by Amanda McLeman, Control Engineering,

No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Safety for 18 years, warehouse maintenance tips, Ethernet and the IIoT, GAMS 2016 recap
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
Strategic outsourcing delivers efficiency; Sleeve bearing clearance; Causes of water hammer; Improve air quality; Maintenance safety; GAMS preview
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
Safety at every angle, Big Data's impact on operations, bridging the skills gap
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me