IMS Research cuts 2012 MOCVD forecast from 342 to 281

IMS Research has cut its forecast for 2012 GaN MOCVD shipments to 281, according to the second quarter 2012 MOCVD update of its GaN LED Quarterly Supply and Demand report.


IMS Research (recently acquired by IHS Inc.) has cut its forecast for 2012 GaN MOCVD shipments to 281, according to the second quarter 2012  MOCVD update of its GaN LED Quarterly Supply and Demand report.

IMS Research Analyst Jamie Fox commented: “The decline in 2012 is due to sufficient tools being in place for backlighting, lighting not yet fully taking off and expiring subsidies in China. The revision to our forecast is due to an analysis of the latest supplier earnings calls and our latest surveys of manufacturers which showed that some companies’ purchase plans have been cut back more than expected in recent months, particularly in China. We have heard about capacity utilization moving up in Taiwan this quarter, but we don’t see this as a worldwide trend at the moment.”

2012 MOCVD Forecast, Source: IMS Research

The graph above shows that 2012 will be much lower than 2010 and 2011, but will still be higher than 2009. 2012 will be a quiet year as, in terms of equipment installation, it will be the low point between the backlighting and lighting cycles. After a huge rush to buy in China in 2011 (it peaked at 92 percent of shipments in the fourth quarter), sales here are dropping markedly in 2012.

The entire worldwide market in the first quarter of 2012 was about the same size as the one largest order in China in the fourth quarter of 2011. However IMS Research believes the market has bottomed out in the first half of 2012. Modest growth should return in the second half of 2012.

GaN MOCVD Units, Source: IMS Research

While the industry is currently in an overcapacity situation which will continue in the short term, longer term projections show that many more reactors will be needed over the coming years to meet the demand in lighting. At the end of June IMS Research will release the latest demand and supply and demand projections. At present, big changes to the long term outlook are not anticipated.

Last quarter IMS reported on a strong quarter for Aixtron which regained the lead in the fourth quarter of 2011. However, as anticipated, this has not lasted, and Veeco was well ahead again in the first quarter with an estimated 59 percent market share. Veeco will also have a clear lead over Aixtron for GaN LED for the full year 2012, according to surveys of end customers.

Other highlights from the second quarter report include:

  • China was the No. 1 region for shipments in the first quarter, followed by Taiwan.
  • Typical tool prices remain about $2 million.
  • K465i was the most popular tool in the first quarter.
  • Epistar is the leader in cumulative tools installed, Elec-Tech is ranked 1st in projected 2012 customers.

For further information about this report, please click here. Alternatively, it may be possible to meet IMS Research analysts face to face shortly to discuss the report. IMS will be holding the LED Lighting Evolution Conference: From Sapphire to Lumens examining LED and MOCVD supply/demand on June 6th in Boston at the Hynes Convention Center featuring influential industry executives and leading financial and industry analysts. Companies presenting include Acuity Brands, Barclays, Canacord Genuity, Cree, Displaybank, GTAT, IMS Research, KLA Tencor, Nichia, QD Vision, Veeco and many more. More details are shown here.

No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2013 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
A cool solution: Collaboration, chemistry leads to foundry coat product development; See the 2015 Product of the Year Finalists
Raising the standard: What's new with NFPA 70E; A global view of manufacturing; Maintenance data; Fit bearings properly
Sister act: Building on their father's legacy, a new generation moves Bales Metal Surface Solutions forward; Meet the 2015 Engineering Leaders Under 40
Cyber security cost-efficient for industrial control systems; Extracting full value from operational data; Managing cyber security risks
Drilling for Big Data: Managing the flow of information; Big data drilldown series: Challenge and opportunity; OT to IT: Creating a circle of improvement; Industry loses best workers, again
Pipeline vulnerabilities? Securing hydrocarbon transit; Predictive analytics hit the mainstream; Dirty pipelines decrease flow, production—pig your line; Ensuring pipeline physical and cyber security
Upgrading secondary control systems; Keeping enclosures conditioned; Diagnostics increase equipment uptime; Mechatronics simplifies machine design
Designing positive-energy buildings; Ensuring power quality; Complying with NFPA 110; Minimizing arc flash hazards
Building high availability into industrial computers; Of key metrics and myth busting; The truth about five common VFD myths

Annual Salary Survey

After almost a decade of uncertainty, the confidence of plant floor managers is soaring. Even with a number of challenges and while implementing new technologies, there is a renewed sense of optimism among plant managers about their business and their future.

The respondents to the 2014 Plant Engineering Salary Survey come from throughout the U.S. and serve a variety of industries, but they are uniform in their optimism about manufacturing. This year’s survey found 79% consider manufacturing a secure career. That’s up from 75% in 2013 and significantly higher than the 63% figure when Plant Engineering first started asking that question a decade ago.

Read more: 2014 Salary Survey: Confidence rises amid the challenges

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.