IMS: Developing countries leading rebound in medium-voltage motors

Slow growth in U.S., Europe dims optimism in sector against rising economies in Asia, South America.

08/08/2011


The global market for medium-voltage (MV) motors experienced a significant contraction in 2010, declining by more than 20% in revenue terms from pre-recession levels. However, in 2011, developing economies are leading the recovery in this estimated $4.1 billion market. According to the 2011 Medium Voltage Motors study, recently published by IMS Research, developing economies are expected to outperform the global market through 2015, when it is estimated that the market will top $5.7 billion.

Emerging economies, such as those in China, India, and Brazil, usually have low-cost labor forces, indigenous sourcing of raw materials, and rapid growth in industry sectors that use MV motors, like metals, mining, and oil and gas. A combination of these factors is expected to generate double-digit revenue growth during the forecast period.

In contrast, the established economies of North America and Western Europe, where MV motor revenues contracted by an estimated 30% in 2010, face a longer recovery period, with only modest single-digit growth forecast to 2015. The market’s recovery to pre-downturn levels is not expected until 2013 at the earliest.

“Developing countries with highly favorable conditions were able to continue growing their domestic MV motor markets during the global recession, while developed economies struggled mightily,” said IMS senior research analyst Mark Meza. “In addition, MV motor suppliers in these regions have been concurrently gaining share in Western countries due to growing exports as a result of a notable increase in quality of their products.”

In the last two years, Asian motor manufacturers in particular have been able to capitalize on increased price sensitivity in heavy industries that use MV motors. This has been evidenced by a significant drop in average selling prices in the OEM space, which has experienced an influx of lower priced MV motors that well-established manufacturers have not been able to match. Replacement of MV motors made by American and European powerhouses with low-cost motors produced in other regions of the world has made these companies take notice.

“The entrenched suppliers have certainly taken notice of an estimated $480 million worth of MV motors sold by suppliers from developing nations in 2010,” Meza said. “This has been especially true in markets where ‘off-the-shelf,’ nonspecialized MV motors can be sold in large volumes at low cost.”

It is expected that once the global economy begins to regain momentum, the leading European and American manufacturers will again be able to leverage the value propositions of durability, reliability, and support and service after the sale that have traditionally driven sales of their MV motors.

- Edited by Chris Vavra, Plant Engineering, www.plantengineering.com



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
World-class maintenance: The three keys to success - Deploy people, process and technology; 2016 Lubrication Guide; Why hydraulic systems get hot
Your leaks start here: Take a disciplined approach with your hydraulic system; U.S. presence at Hannover Messe a rousing success
Hannover Messe 2016: Taking hold of the future - Partner Country status spotlights U.S. manufacturing; Honoring manufacturing excellence: The 2015 Product of the Year Winners
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Digital oilfields: Integrated HMI/SCADA systems enable smarter data acquisition; Real-world impact of simulation; Electric actuator technology prospers in production fields
Improving flowmeter calibration; Selecting flowmeters for natural gas; Case study: Streamlining assembly systems using PC-based control; CLPM: Improving process efficiency, throughput
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Warehouse winter comfort: The HTHV solution; Cooling with natural gas; Plastics industry booming

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me