HMI workstations at a chemical plant

Flat-panel displays, protected properly, can perform well and stand up to hard use even in a hazardous and corrosive environment.


Using a pressurized enclosure allows a variety of electrical products to be used in a hazardous environment. A slow flow of compressed air drives out potentially explosive gasses. Source: Pepperl+Fuchs, Inc.When Paul Anderson, the electrical controls and instrumentation technician at Hydrite Chemical Company, needed to replace his obsolete control system and field-mounted HMIs, he had a list of plant requirements and regulations that he was determined to meet. He needed an open system for flexibility and easy updates in the future. The operator interface had to be state-of-the-art and extremely rugged, able to withstand the rigors of a hazardous and corrosive chemical plant environment and have a long MTBF (mean time between failure). Plus he wanted a supplier that shared his operating philosophy and would form a partnership to help Hydrite make the best products at the lowest possible cost.

Many industrial plants are still using legacy CRT displays, but many are nearing their end of life and are no longer available. Industrial flat-panel monitors have become the product of choice for such applications but the exact meaning of “industrial” in this context is still not always clear. Due diligence requires customers to investigate who will provide the best industrially hardened or, if required, hazardous location certified LCD flat-panel technology.

Hydrite Chemical Co. is a manufacturer and distributor of ingredients for food and beverage processors, fluoride for water treatment facilities, and a host of chemicals for cleaning and sanitation across a wide range of industries. Hydrite also partners with other companies to prepare high-quality products and distribute them worldwide.

Some of the final products are flammable or have flammable ingredients, so many of the materials and processes used by Hydrite are located in hazardous areas and must meet stringent safety requirements. Most of Hydrite’s Cottage Grove, WI, plant is classified as Class I, Division 1. Other areas in the plant are Class I, Division 2.  Any equipment used must conform to these hazardous area classifications. Hydrite plants are also certified to ISO 9001:2000 standards, which ensures that the products they produce are of uniformly high quality, and that all personnel and processes follow the same formulas and procedures every time.

Flat-panel monitors, even when mounted in a pressurized enclosure, can be very compact, using space efficiently. Source: Pepperl+Fuchs, Inc.Chemicals are produced in batches, and the batch is managed by a combination of automatic control and operator adjustments. Typically, there are multiple feed tanks, with raw ingredients being supplied from drums, totes, and bulk tanks. Correct ratios and feeding of ingredients must be carefully controlled following the recipe’s instructions. Once a batch process begins, time to a completed product can take just a few hours or up to several days. Once the process has started, any interruptions or downtime can ruin the batch. The process also produces emissions and other waste by-products that must be managed, so the ease of operator access is an integral part of the batch processing workflow.

Gaining access to batching and process information directly from the plant floor saves time and can prevent process errors that interrupt production. But having an HMI display close to the process would mean having a Class I, Division 2, industrial-rated monitor designed for continuous use over an extended period of time under heavy-duty conditions. It would have to be located in the manual addition area to facilitate the operators, and include a hardened touchscreen that would stand up to that environment.

Choosing the right system

Anderson was assigned the task of upgrading the aging DCS. First, he selected a state-of-the-art control system with intrinsically safe remote I/O. The benefits of remote I/O were twofold: First, conduit and wiring were significantly reduced along with installation time. Second, the segmented system provided reliable system availability together with the ability to make repairs without shutting down the process.

This photo illustrates the difference between the new HMI approach and the older explosion-proof enclosures used before. Source: Pepperl+Fuchs, Inc.

For the operator interface, he selected industrial workstations with touchscreens from a supplier that designed and built its own products, to Hydrite's specifications, in its panel shop with UL508A, UL698A, and CSA approval.

Anderson chose operator workstations from Pepperl+Fuchs because they met all of his requirements. This came after searching many vendors without success. The units he chose tolerate the harsh manufacturing environment, are resistant to corrosion, and have a MTBF of 500,000 hours. He noted that most other units he considered could only claim half that figure. This meant that his operators could trust that the HMIs would be reliable and redundant within the control system.

Membrane keyboards can also be practical in difficult environments. These are particularly useful where operators are required to input complex or large amounts of information manually, beyond what is practical for a touchscreen. Source: Pepperl+Fuchs, Inc.

The workstations are mounted in a 316 stainless steel NEMA 4X Division 2 enclosure with either a pedestal-mounted or wall-mounted configuration. The enclosure dimensions are smaller than the older explosion-proof units so they take up less valuable space in the facility. With the hardened resistive touchscreens and industrial-grade electronics, the displays on the hazardous factory floor were able to reproduce the same high-quality picture as the monitors in the control room without reprogramming the configuration. Now operators had the same functionality in the plant as they had in the control room. Plant personnel were no longer required to make several trips from the plant floor to the control room each day. It is easier for operators to make changes and adjustments, and they have more meaningful information at their fingertips. This helps avoid unnecessary downtime, and Anderson cites lower maintenance costs. There is also an unexpected bonus: The flat-panel displays consume less power and generate less heat than the CRT predecessors.

The right type of HMI hardware, when used with an up-to-date control platform and well-designed graphics, can create a powerful visualization, control, or information computing solution.

Joseph A. Kaulfersch is a market analyst for Pepperl+Fuchs, Inc.

The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
Doubling down on digital manufacturing; Data driving predictive maintenance; Electric motors and generators; Rewarding operational improvement
2017 Lubrication Guide; Software tools; Microgrids and energy strategies; Use robots effectively
Prescriptive maintenance; Hannover Messe 2017 recap; Reduce welding errors
The cloud, mobility, and remote operations; SCADA and contextual mobility; Custom UPS empowering a secure pipeline
Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Research team developing Tesla coil designs; Implementing wireless process sensing
Commissioning electrical systems; Designing emergency and standby generator systems; Paralleling switchgear generator systems
Natural gas engines; New applications for fuel cells; Large engines become more efficient; Extending boiler life

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Featured articles highlight technologies that enable the Industrial Internet of Things, IIoT-related products and strategies to get data more easily to the user.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me