Having the right tools in your arsenal

Everyone starts out green, but getting a handle on a few important resources will move you to the experienced side much faster.

02/05/2013


Have you ever been on a project where everything went as planned? If you’re like me, the answer is no. I would like to say yes, but who would I be kidding? Issues can vary from bad wiring, incorrect instrumentation calibration, wrong equipment specified or delivered, equipment installed in the wrong place, poor documentation, communication issues, seized motors, and so on. That’s a list that doesn’t end. Devoting enough up-front time on a project will minimize surprises during commissioning, but as much as one plans and prepares for a project, there are always issues, and those issues will need to be resolved by you. Having the right tools in your arsenal will make all the difference in finding the best solution quickly. Tools are not limited to screwdrivers, serial cables, or multimeters. Tools include experience, resources, and having the right positive attitude.

I think we can all agree that experience goes a long way in any industry. A good education can definitely help you refine and polish your capability to tackle tasks thrown your way, but the school of hard knocks is really where experience grows greatly. I’m sure we can share different experiences and reflect back on how green we were when we began our careers in automation. Over time, by researching, troubleshooting, dealing with different platforms, working with a variety of products, and trial and error, we gain experience, learn, and grow.

There is a vast variety of automation solutions out there, with new solutions being created and others becoming extinct. I’ve been working in automation for several years now, and I have been dubbed an expert on certain things, but I still consider myself a student. I work alongside others who are my unofficial mentors. It’s astonishing some of the stuff they just know, stuff they have picked up over the years, but as much as they might deny it, they were all green once too.

This leads to one of the other tools I mentioned earlier: resources. Resources take many forms: manuals, training materials, software, tech support, and others, but a great resource is a seasoned engineer. Having a pool of seasoned engineers in your corner during a project that seems more like a boxing match is a great advantage when you need to kick some automation…well, you know what. Most engineers are willing to share what they know, formally or in passing conversations. I myself do not hesitate in passing on what I know if someone asks, but be warned that I tend to ramble and branch off on tangents.

The last tool that I want to share is attitude. I believe that having the right attitude can open doors, launch your career forward, and give you much self reward. Having the right attitude helps motivate you and others around you. Having a positive attitude in your professional and private life is just a good practice in general. With the right attitude, you don’t look at a problem, give up, and pass the buck – you tackle that problem head on.

I don’t think anyone expects an individual to know everything there is to know about automation, but with the right tools, a challenge can and will get figured out. Correct me if I’m wrong, but as integrators, the same challenges that cause us stress and long hours are also what motivate us to do what we do.

This post was written by Miguel Gutierrez, a senior control system specialist at MAVERICK Technologies, a leading system integrator providing industrial automation, operational support, and control systems engineering services in the manufacturing and process industries. MAVERICK delivers expertise and consulting in a wide variety of areas including industrial automation controls, distributed control systems, manufacturing execution systems, operational strategy, and business process optimization. The company provides a full range of automation and controls services – ranging from PID controller tuning and HMI programming to serving as a main automation contractor. Additionally MAVERICK offers industrial and technical staffing services, placing on-site automation, instrumentation and controls engineers.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Hannover Messe 2016: Taking hold of the future - Partner Country status spotlights U.S. manufacturing; Honoring manufacturing excellence: The 2015 Product of the Year Winners
Inside IIoT: How technology, strategy can improve your operation; Dry media or web scrubber?; Six steps to design a PM program
World-class manufacturing: A recipe for success: Finding the right mix for a salad dressing line; 2015 Salary Survey: Manufacturing slump dims enthusiasm
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Digital oilfields: Integrated HMI/SCADA systems enable smarter data acquisition; Real-world impact of simulation; Electric actuator technology prospers in production fields
Special report: U.S. natural gas; LNG transport technologies evolve to meet market demand; Understanding new methane regulations; Predictive maintenance for gas pipeline compressors
Warehouse winter comfort: The HTHV solution; Cooling with natural gas; Plastics industry booming
Managing automation upgrades, retrofits; Making technical, business sense; Ensuring network cyber security
Designing generator systems; Using online commissioning tools; Selective coordination best practices

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
click me