Greenhouse gas flow meter for process, plant flue gas applications

A mass flow meter designed to monitor greenhouse gases can help users in chemical, food processing, petroleum refining, pharmaceutical, electric power generation, and other plants be in compliance with the EPA emission requirements.

09/15/2010


Process and plant engineers who are concerned about the U.S. EPA’s greenhouse gas  monitoring requirements will find the ST51 GHG mass flow meter from Fluid Components International (FCI) provides just what they need. The ST51 features a no-moving-parts design that’s non-clogging, and it operates over a wide flow range with low-flow sensitivity. It’s packaged in an explosion-proof transmitter, and the calibration is matched to the user’s actual gas composition and installation conditions. Flue gases, the mixed-composition hydrocarbon greenhouse gases that are the by-product of an industrial plant combustion process, can include nitrogen, carbon dioxide, oxygen, water vapor, sulfur oxides, nitrogen oxide, carbon monoxide, particulates, ozone, and methane. 

The ST5 features a thermal mass, insertion-style flow element with flow accuracy to ±1% of reading over a broad flow range from 0.3 to 400 SFPS (0.08 to 122 MPS), and repeatability of ±0.5% of reading. The flow element is available for use in line sizes from 2 to 24 in. (51 to 610 mm). It operates over a wide turndown range of 100:1 and at temperatures from 0 to 250 °F (-18 to 121 °C). It withstands pressures up to 500 psig (34 bar).

The unit's robust thermal mass flow sensing element has no moving parts and no orifices to clog or foul, allowing it to attain virtually maintenance-free service in wet, dirty biogas applications. The flow element is constructed with a 316L stainless steel body and Hastelloy C-22 thermowell sensors to resist corrosion. It includes built-in temperature compensation circuitry for accurate, repeatable measurement as temperatures rise and fall seasonally.

Dual 4-20 mA analog outputs are user-assignable to flow rate and/or temperature, and there is a 0-1 kHz pulse output for totalized flow. The transmitter’s digital communications include an RS-232C port, and with units that have the digital display option there is a wireless IR link for PDA use. An optional integral digital display features a two-line, 16-character LCD screen that can be rotated in 90° increments for optimum viewing. The LCD screen’s top line is assigned to flow rate, and the bottom line is user-assignable for temperature readings or totalized flow.

www.fluidcomponents.com

Fluid Components International

- Also from Control Engineering:

Gas flowmeter for chlorine water disinfection systems

Mass flowmeter optimized for biofuels applications

Video Demonstration: Thermal Mass Flow Sensing Technnology


- Edited by Renee R. Bassett for Control Engineering, www.controleng.com



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2016 Product of the Year; Diagnose bearing failures; Asset performance management; Testing dust collector performance measures
Safety for 18 years, warehouse maintenance tips, Ethernet and the IIoT, GAMS 2016 recap
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
Safety at every angle, Big Data's impact on operations, bridging the skills gap
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me