Government in the power business

Pleas came from manufacturers and developers in the U.S. wind power industry requesting that the U.S. Government extend the PTC.

07/09/2012


As an analyst covering the global generators market for IMS Research, recently acquired by IHS  Inc., I recently had the privilege to attend Wind Power 2012 in Atlanta, Ga., and Power-Gen Europe 2012 in Cologne, Germany. While both conferences were well attended and very educational, it was clear that the prevailing theme at each event was the power that government policy makers have over the power generation industry.  

At Wind Power 2012 the pleas came from manufacturers and developers in the US wind power industry requesting that the U.S. Government extend the PTC (Production Tax Credit). The PTC is a federal renewable electricity production tax credit that gives wind power producers a $0.022/kWh tax credit for electricity generated by qualified energy resources and is set to expire on December 31, 2012.

The PTC has been around since 1992 but has expired and been renewed several times in between, creating boom or bust cycles within the wind industry. Each time the PTC was allowed to expire, the following year showed at least a 75% drop in wind capacity installations according to the American Wind Energy Association. The uncertainty created by whether the PTC will be renewed is already affecting turbine component orders for wind generators and converters, for the second half of 2012 with 2013 orders being almost non-existent in the U.S. market. Many manufactures have started layoffs and some estimate that as many as 40,000 US jobs in the industry could be lost.

Whether you agree with energy subsidies or not, globally they are here to stay for the foreseeable future, with fossil fuel subsidies still receiving the lion’s share of government funding. It appears to me that the main issues are caused by the market uncertainty created by the on-again, off-again way the US government goes about its business. If the U.S. truly wants to hit their targets for renewable power, a clear long term plan to get there needs to be put in place.

At Power-Gen Europe 2012 the conference had a similar feel due to the controversial policy to rapidly phase out nuclear power in Germany. After the 2011 tsunami and subsequent nuclear disaster at the Fukushima Daiichi nuclear power plant in Japan, Germany shut down eight of their older nuclear power plants and swiftly put a plan in place to close the remaining nine by 2022.

During a Plenary Session titled “German Power Policy – Solution or Illusion”, a panel of power industry experts shared their views and concerns about the German power policy. Some on the panel considered the decision by Chancellor Angela Merkel to close down so many nuclear plants so quickly a “knee jerk” reaction. While most agreed that moving toward renewable power was good for the future of Germany, there was also talk about the lack of leadership and vision from the plan that government policy makers had laid out.

The plan is to phase out all nuclear power over the next decade and increase its share of power from renewable sources from 20% to 35% by 2020 and 50% by 2030. The size of this undertaking is enormous, and the current Eurozone economic crisis isn’t going to help matters. Not to mention the substantial amount of investment needed to pull it off will have to come from somewhere.

Offshore wind power off the coast of the North Sea will have to play a key role in reaching that goal. One of the major hurdles discussed in the session was the required improvement of Germany’s power grid to get the power from the North, down to the more densely populated South. The final destination has been set by the German government, but the road will have to be paved by the sweat and hard work of the German power industry.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2016 Product of the Year; Diagnose bearing failures; Asset performance management; Testing dust collector performance measures
Safety for 18 years, warehouse maintenance tips, Ethernet and the IIoT, GAMS 2016 recap
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
Safety at every angle, Big Data's impact on operations, bridging the skills gap
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me