Getting competitive: Georgia Tech conference focuses on manufacturing future

Panel sees need for boosts in innovation, transportation

03/06/2012


While "Made in the USA" is a slogan that is harder to find today than in years past, it would be wrong to assume that U.S.-based manufacturing is headed toward extinction.

That was one of the key points to emerge from a two-day conference titled, "U.S. Manufacturing Competitiveness Initiative: Dialog on Next Generation Supply Networks and Logistics."

Representatives from industry, labor, government, and academia gathered at the Georgia Tech Global Learning Center in Atlanta on Feb. 28-29, 2012 to share ideas on ways to improve America's manufacturing competitiveness from the perspective of supply networks and advanced logistics.

“Our challenge is to not only get back to ‘made in America' but also 'invented in America’," said G.P. "Bud" Peterson, president of Georgia Tech, in his opening remarks. “The same spirit of innovation and collaboration that once gave us preeminence in manufacturing can help us regain our competitiveness, thereby creating jobs, increasing exports and serving as a catalyst for a healthy economy.”

Several speakers noted that while U.S. manufacturing has unquestionably suffered in certain industries, the nation's industrial base overall remains strong and is a leading exporter in key areas including aerospace, chemicals, machinery and medical equipment. In fact, by capitalizing on its unique strengths, America is well-positioned to continue growing its manufacturing output and exports, thereby enhancing its global competitiveness.

However, America's ability to produce and export products to the global marketplace is threatened by serious neglect of the country's transportation infrastructure—manufacturing's critical supply chain and logistical backbone. Furthermore, manufacturing industries are facing a talent drain as older workers retire and young people opt for careers in other fields.

Discussion topics covered a breadth of national and regional issues ranging from efficient cargo rail systems to just-in-time air delivery to tax and regulatory concerns. Among the points raised:

  • Manufacturing accounts for 11% of U.S. GDP. In dollar terms, the U.S. manufacturing sector is larger than the entire GDP of Canada, India or Brazil.
  • Public perception of factories as dirty, low-wage, unsafe workplaces are outdated. Today's manufacturing plants typically require the skilled operation of complex machinery.
  • The trend toward outsourcing manufacturing is beginning to show signs of a reversal as rising transportation costs and rising wages overseas are making it more cost effective to locate factories closer to their markets.
  • The U.S. transportation infrastructure has stopped growing and faces a critical period of reinvestment. Basic but necessary improvements and repairs to the nation's highways and bridges will cost hundreds of millions of dollars—but further delay will only raise the cost.
  • Savannah, the nation's fourth-busiest port, is also the shallowest. Dredging the harbor will provide access for the new generation of ultra-large Panamex container ships, and elevate Georgia's global competitiveness as an import and export center.
  • Intermodal freight rail expansion is a cost-efficient way to ease highway congestion and create capacity to improve supply chain efficiency.
  • Development of a long-range, comprehensive national manufacturing strategy and an energy strategy are essential ingredients for ensuring economic competitiveness.
  • The tax and regulatory structure must be simplified and streamlined.

In his welcoming comments, conference chair Chelsea C. “Chip” White III, Schneider National Chair in Transportation and Logistics at Georgia Tech said, "We are delighted to be partnering with the Council on Competitiveness to address how the supply chain and logistics industry can help to provide competitive advantage for U.S. manufacturing and in so doing help to strengthen the U.S. economy."

Among the conference speakers were: Jack McDougle, senior vice president, U.S. Council on Competitiveness; Thomas Mayor, senior executive advisor, Booz and Co.; Helmuth Ludwig, CEO, Siemens Industry Sector, North America; Doug Stotlar, president and CEO, Con-Way; Deb H. Butler, executive vice president of planing and chief information officer, Norfolk Southern; Chris Lofgren, president and CEO, Schneider National; Ray Reulbach, vice president, UPS Customer Solutions; Curtis J. Foltz, executive director, Georgia Ports Authority; Warren Jones, aviation development manager, Hartsfield-Jackson International Airport; Paul Yarossi, president, HNTB; Chris Cummiskey, commissioner, Georgia Dept. of Economic Development; and Chris Gaffney, senior vice president, Coca-Cola Refreshments.

Additional participants and panelists included: Hal Long, executive vice president-operations, Shaw Industries; William L. Strang, senior vice president of operations, TOTO; Bob Roberts, vice president, Jones Lang LaSalle Americas; Michael D. Meyer, professor and director of the Georgia Tech National University Transportation Center; Jane Ammons, Chair of the School of Industrial and Systems Engineering; Leon McGinnis, professor emeritus and associate director of the Manufacturing Research Center, Georgia Tech; Ron Jackson, commissioner, Technical College System of Georgia; and Edward M. Rogers, global strategy manager, UPS.

"Dialogue on Next Generation Supply Networks and Logistics" was sponsored by Georgia Tech and the U.S. Council on Competitiveness. The Council is a non-partisan, non-governmental organization composed of CEOs, university presidents and labor leaders. The Atlanta event was the 13th in a series of conferences held around the country addressing various aspects of manufacturing competitiveness. Georgia Tech's host role in the conference was coordinated by the H. Milton Stewart School of Industrial and Systems Engineering.

A joint Georgia Tech-Council on Competitiveness Report will detail the forum's findings, and it will contribute to the Council's National Manufacturing Strategy.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2013 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Leaders Under 40 program features outstanding young people who are making a difference in manufacturing. View the 2013 Leaders here.
The new control room: It's got all the bells and whistles - and alarms, too; Remote maintenance; Specifying VFDs
2014 forecast issue: To serve and to manufacture - Veterans will bring skill and discipline to the plant floor if we can find a way to get them there.
2013 Top Plant: Lincoln Electric Company, Cleveland, Ohio
Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Plant Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.

Bring focus to PLC programming: 5 things to avoid in putting your system together; Managing the DCS upgrade; PLM upgrade: a step-by-step approach
Balancing the bagging triangle; PID tuning improves process efficiency; Standardizing control room HMIs
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software

Annual Salary Survey

Participate in the 2013 Salary Survey

In a year when manufacturing continued to lead the economic rebound, it makes sense that plant manager bonuses rebounded. Plant Engineering’s annual Salary Survey shows both wages and bonuses rose in 2012 after a retreat the year before.

Average salary across all job titles for plant floor management rose 3.5% to $95,446, and bonus compensation jumped to $15,162, a 4.2% increase from the 2010 level and double the 2011 total, which showed a sharp drop in bonus.

2012 Salary Survey Analysis

2012 Salary Survey Results

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.