For IP-based video surveillance, the future is now

The trend to IP-based video surveillance is, by now, firmly established. The question is no longer “Will IP-based equipment sales overtake analogue equipment sales?”

06/12/2012


The trend to IP-based video surveillance is, by now, firmly established. The question is no longer “Will IP-based equipment sales overtake analogue equipment sales?” In fact, IMS Research, recently acquired by IHS Inc., forecasts that 2013 will be the tipping point when world network video surveillance equipment sales overtake analogue video surveillance equipment sales.

The arrival of IP-technology has instead bought its own questions, and simultaneously changed the shape of the market place. With the emergence of IP-based technology, IT distributors and IT integrators are now, increasingly, competing with traditional security distributors and security integrators.

IMS Research recently published a report, IP Trends in Security – A Survey of Systems Integrators and Installers, which found that currently 80% of North American systems integrators and installers purchase some IP-based video surveillance equipment from IT distributors, and that this was expected to increase to 90% of systems integrators and installers in three years’ time.

This finding compliments the fact that increasingly IT distributors are looking to add video surveillance products to their product range in the next 18 months. This could be good news for the traditional IT integrators who are also looking to enter the video surveillance industry, as they will already have the established relationships with their IT distributors. However, many IT integrators are not looking to their distributors for the security knowledge they lack but are instead going directly to the manufacturers of the cameras they are using.

The available bandwidth for these IP-based technologies is still a limiting concern. Within North America, the U.S. has an average broadband speed of around 5.8Mbps, and is ranked 12th in broadband speed for the world. Despite the concerns with available bandwidth, broadband speeds are likely to continue to increase, leading to greater capability and greater expectations from the technology.

A key finding from the recently released IP Trends in Security – A Survey of Systems Integrators and Installers is the influence IT managers have in the decision of what IP-based video surveillance products are chosen. IT managers were ranked ahead of other key influencers such as physical security managers, chief security officers and consultants in their ability to influence which IP-based video surveillance products are chosen.

One reason for this influence may be the fact that IT budgets are typically larger than the associated security budgets. Instead of security managers buying an IP-camera and speaking with the IT department about how to incorporate it into the network, increasingly the IT department will buy the security equipment from their budget and incorporate the device into their network.

IMS Research’s report, IP Trends in Security – A Survey of Systems Integrators and Installers in Europe and North America – 2012 Edition, is published in two regional volumes, Europe and North America.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Strategic outsourcing delivers efficiency; Sleeve bearing clearance; Causes of water hammer; Improve air quality; Maintenance safety; GAMS preview
World-class maintenance: The three keys to success - Deploy people, process and technology; 2016 Lubrication Guide; Why hydraulic systems get hot
Your leaks start here: Take a disciplined approach with your hydraulic system; U.S. presence at Hannover Messe a rousing success
Flexible offshore fire protection; Big Data's impact on operations; Bridging the skills gap; Identifying security risks
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me