Fine-tuning your alarm management system

Sometimes the biggest obstacles to effective alarm management are cultural, not technical.

06/05/2012


Real-world Engineering BlogIn the wake of the Deepwater Horizon disaster, alarm management has moved once again into the forefront for many companies as they ask: “What is the best way to keep an operator from missing a key alarm when things start to go wrong? What are the obstacles to having an effective alarm management system?” In my experience, the decision to have, or not have, an alarm is more often cultural than it is based on a good operational analysis of the process. That’s why the alarm rationalization process is so necessary and beneficial. It strips away the cultural, “I want the operator to know about…” and replaces it with, “This is the most important thing the operator has to do.”

 

Many plant personnel do not appreciate just how significant this change is. Almost from the introduction of the DCS, its ability to generate more alarms than a human can effectively deal with was not appreciated by non-operators. Engineers and plant managers wanted the operators to know everything that was happening in their unit with the end result being just the opposite, particularly in upset situations. The DCS suppliers eventually gave us the tools to do conditional alarming which, for the most part, went unused by the typical project execution team because it wasn’t part of the scope. Process designers felt that every measurement should have the full suite of alarms and no one had the brief to question that. But things are changing.

 

ISA 18.2 outlines a methodology for developing an effective alarm management system by first requiring the plant to create an alarm philosophy document that defines the criteria for rating an alarm’s severity and urgency. The typical document classifies four levels of severity based on safety, environmental impact, or financial impact, and four levels of urgency based on how quickly the operator has to take a corrective action. A required operator response, other than to acknowledge that the alarm occurred, is a significant paradigm shift for most plants as a high percentage of current alarms are really for operator notification, often about something for which there is no corrective action. When one of the more catastrophic of those occur, all the operators can do is sit back, watch the flood of alarms resulting from the event that couldn’t be prevented in the first place, and, of course, wear out the horn acknowledge button.

 

The final solution rests with the management of the facilities, because ultimately it costs money to do the work required to implement and maintain a good alarm management system. It has to be in the culture of the facility that safety is a priority or the time and money required won’t be allocated. It also has to be in the culture that an alarm requires the operator to take a corrective action to prevent an undesirable incident.

 

Also read:

 

Managing alarms using rationalization, and

 

A rational approach to alarm rationalization

 

This post was written by Bruce Brandt. Bruce is the DeltaV technology leader at MAVERICK Technologies, a leading system integrator providing industrial automation, operational support and control systems engineering services in the manufacturing and process industries. MAVERICK delivers expertise and consulting in a wide variety of areas including industrial automation controls, distributed control systems, manufacturing execution systems, operational strategy, and business process optimization. The company provides a full range of automation and controls services – ranging from PID controller tuning and HMI programming to serving as a main automation contractor. Additionally MAVERICK offers industrial and technical staffing services, placing on-site automation, instrumentation and controls engineers. 



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2016 Product of the Year; Diagnose bearing failures; Asset performance management; Testing dust collector performance measures
Safety for 18 years, warehouse maintenance tips, Ethernet and the IIoT, GAMS 2016 recap
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
Safety at every angle, Big Data's impact on operations, bridging the skills gap
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me