Ethernet communications system reduces energy consumption in multiple areas
SERCOS Energy defines parameters and commands for the reduction of energy consumption in a uniform vendor-independent manner.
The SERCOS vendor organizations have released the energy profile specification for the SERCOS III Real-time Ethernet Communications System.
SERCOS Energy reduces energy consumption in three areas. First, the permanent load at motor/machine standstill is reduced; second, the consumption depending on the process is dynamically adjusted considering the target completion times/dates (partial load operation); and third, energy is saved during processing by switching off components that are not required at a particular time or point in the process (partial machine operation).
SERCOS Energy is an application layer profile that defines parameters and commands for the reduction of energy consumption in a uniform vendor-independent manner. The control reads out parameters of each SERCOS Energy component via the SERCOS III network, receiving status information and detailed consumption values. Depending on the situation (e.g., scheduled or unscheduled breaks, machine components not needed in the current production process) the control can switch connected components (drives, I/O, sensors) into energy-saving conditions up to complete shut-down, considerably reducing their energy consumption.
An 8-page whitepaper describing SERCOS Energy can be downloaded.
- Edited by Amanda McLeman, Control Engineering, www.controleng.com
- Events & Awards
- Magazine Archives
- Oil & Gas Engineering
- Salary Survey
- Digital Reports
- Survey Prize Winners
- CFE Edu
Annual Salary Survey
Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.
There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.
But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.
Read more: 2015 Salary Survey