Enclosures for hazardous locations

Pentair's Hoffman brand Zonex, IECEX- and ATEX-Certified Enclosures are designed for applications where increased safety is needed to safely house electrical components in hazardous areas.

03/30/2012


Pentair's Hoffman brand ZONEX, IECEX- and ATEX-Certified Enclosures are designed for applications where increased safety is needed to safely house electrical components in hazardous areas. Courtesy: PentairPentair Technical Products' line of Hoffman brand Zonex IECEX- and ATEX-Certified Enclosures has been released. Zonex hinge-cover and screw-cover enclosures are designed for use in applications where “increased safety” protection (Ex e), as defined by the ATEX Directive 94/9/EC, is acceptable to safely house electrical components in Zone 1 and Zone 2 rated areas. These enclosures are not intended for use in explosion-proof or flame-proof (Ex d) applications.

The expansion of the Type 316 stainless steel ZONEX platform includes new inch-based offerings in an extended range of sizes, including hinge and screw cover versions. All Zonex models are now offered with enhanced customization options including: material changes, size changes, paint options, holes and cutouts, population of any ATEX-certified terminal block, stopping plug or drain, mounting bracket changes and other modifications. Hinge cover models are ATEX, IECEX, and AEx certified. Screw cover models are ATEX and IECEX certified.

New inch-dimensioned hinge cover enclosures are available in sixteen standard sizes from 12 x 12 x 6-in. to 36 x 24 x 8-in. and come standard with NEMA-style mounting feet on the top and bottom, a full size bottom gland plate and a one-piece continuous gasket on the door and gland plate. Hinge cover models feature a 10-mm brass internal/external bonding provision, a quarter-turn latch with a 3-mm double bit insert and the required panel and bonding hardware. Side mount brackets, a high-temperature silicon gasket, gland plate changes from zero to four and enclosure dimension changes up to 60 x 36 x 18-in. are available upon request.

Screw cover enclosures are available in five sizes ranging from 4 x 4 x 3-in. to 10 x 10 x 5-in. These enclosures feature welded-on, full-width top and bottom wall-mount brackets, a 6-mm internal/external brass bonding provision, stainless steel cover screws, a one-piece continuous gasket and required panel and bonding hardware. A high-temperature silicon gasket is available upon request.

“The Zonex enclosure family now features European ATEX and global IECEX certifications on all products, as well as American AEXe certification on the hinge cover products,” said Greg Quick, Hoffman product manager. “We have expanded the Zonex Enclosures line to include small screw covers and inch dimensions, as well as expanded and enhanced modification and population capabilities, to better meet the needs of the marketplace for enhanced capabilities with short lead-times and the required certification.”

Applications

Zonex Enclosures deliver a solution for terminal and junction enclosure applications in potentially hazardous locations, including:

  • Petroleum and chemical processing
  • Water treatment processing
  • Pharmaceutical processing
  • Grain processing

Features and benefits of the Zonex Enclosure family make it simple to specify for diverse application requirements:

  • ATEX, IECEX and AEx certifications
  • Expanded modifications and customization to fit specific application requirements
  • Material change options: Type 304 stainless steel, aluminum and painted mild steel
  • Vertical and horizontal mounting bracket options
  • Zero to four gland plates to facilitate easy cable gland entry
  • 3-mm double-bit insert for enhanced security
  • Expanded certified component installation flexibility
  • Industry-leading availability in standard or modified product

Pentair Inc.

www.pentair.com 

Pentair Technical Products

www.hoffmanonline.com 

- Edited by Chris Vavra, Control Engineering, www.controleng.com 

System Integration Channel: controleng.com/integration



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Your leaks start here: Take a disciplined approach with your hydraulic system; U.S. presence at Hannover Messe a rousing success
Hannover Messe 2016: Taking hold of the future - Partner Country status spotlights U.S. manufacturing; Honoring manufacturing excellence: The 2015 Product of the Year Winners
Inside IIoT: How technology, strategy can improve your operation; Dry media or web scrubber?; Six steps to design a PM program
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Digital oilfields: Integrated HMI/SCADA systems enable smarter data acquisition; Real-world impact of simulation; Electric actuator technology prospers in production fields
Special report: U.S. natural gas; LNG transport technologies evolve to meet market demand; Understanding new methane regulations; Predictive maintenance for gas pipeline compressors
Warehouse winter comfort: The HTHV solution; Cooling with natural gas; Plastics industry booming
Managing automation upgrades, retrofits; Making technical, business sense; Ensuring network cyber security
Designing generator systems; Using online commissioning tools; Selective coordination best practices

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me