Electronic scrap recycling facility being built in Sweden

ABB is working with Boliden to build a plant at the electronic scrap recycling facility Rönnskär copper smelter in northern Sweden with the intent of tripling its recycling capacity. Metal recovery from scrap takes 10-15% of the energy required to refine metal from raw ore, the company said.

03/28/2012


Rönnskär is one of the world’s most efficient integrated copper smelters and metallurgical complexes. In 2011 it produced 219,000 metric tons of copper, as well as considerable quantities of lead, gold, silver, zinc clinker, sulfuric acid and liquid sulfuABB automation and power technologies are helping metals company Boliden create the world’s largest electronic scrap recycling facility – recovering copper and precious metals from electronic scrap using only a fraction of the energy required to extract metals from ore.

Boliden is currently ramping up a new plant adjacent to its existing electronic scrap recycling facility at the Rönnskär copper smelter in northern Sweden - an expansion that will almost triple recycling capacity from 45,000 metric tons to 120,000 metric tons a year, making it the largest e-scrap recycling facility in the world.

Rönnskär is an integrated metallurgical complex, which smelts and refines metals from mined copper concentrates and from recyclable materials like metal shred and electronic scrap. E-scrap comes from computers, mobile phones, circuit boards and other electronic equipment and contains metals such as copper, gold and silver.

The pre-sorted and pre-shredded e-scrap is smelted at Rönnskär using Boliden’s proprietary Kaldo furnace technology. After smelting, the molten metals are transferred to the adjoining production lines for processing into high-grade products.

Electronic scrap that is recycled at the Rönnskär plant in northern Sweden. Courtesy: BolidenIn 2010, e-scrap accounted for 6 percent of Rönnskär’s feed, with recyclable materials as a whole contributing 24 percent. When the new plant reaches full capacity in the second quarter of 2012, these figures will rise to 14 and 31 percent respectively, thus enabling Rönnskär to become less dependent on copper concentrates and more energy efficient.

Recovering metals from electronic scrap requires only 10-15 percent of the energy required to extract metals from ore. The process also supports the European Union’s Waste Electrical and Electronic Equipment (WEEE) Directive, which requires 4 kg of e-scrap to be collected and sorted per head of population in the EU. This is expected to rise to 13-16 kg per person by 2016.

ABB has played a significant role in the Kaldo plant expansion and at the Rönnskär complex as a whole. For the new Kaldo plant, ABB has supplied a comprehensive range of process-critical automation and power technologies, including the process control system.

The entire e-scrap recycling process is controlled by ABB’s 800xA Extended Automation System, and includes customized features such as remote operation of the process and an exact positioning system to prevent spilling of molten metal from the furnace.

Gold bars. Courtesy: BolidenThe System 800xA solution for the Kaldo plant expansion is integrated with Rönnskär’s existing System 800xA distributed control system, which controls the entire site and all its production processes. When ABB first installed the first ABB Advant automation system at Rönnskär in 1999, it was one of the largest plant control systems of all time, with more 50,000 input/output (I/O) points.

On the electrical side, the ABB solutions include low- and medium-voltage switchgear to ensure safe and reliable power distribution throughout the plant; low-voltage industrial drives to speed-control the motor applications and reduce energy consumption; and Resibloc dry-type distribution transformers, which are explosion-proof and environmentally friendly, and can withstand extreme loads and very high levels of mechanical stress and thermal shock.

ABB

www.abb.com 

Boliden

www.boliden.com 

- Edited by Chris Vavra, Control Engineering, www.controleng.com 



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
World-class maintenance: The three keys to success - Deploy people, process and technology; 2016 Lubrication Guide; Why hydraulic systems get hot
Your leaks start here: Take a disciplined approach with your hydraulic system; U.S. presence at Hannover Messe a rousing success
Hannover Messe 2016: Taking hold of the future - Partner Country status spotlights U.S. manufacturing; Honoring manufacturing excellence: The 2015 Product of the Year Winners
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Digital oilfields: Integrated HMI/SCADA systems enable smarter data acquisition; Real-world impact of simulation; Electric actuator technology prospers in production fields
Improving flowmeter calibration; Selecting flowmeters for natural gas; Case study: Streamlining assembly systems using PC-based control; CLPM: Improving process efficiency, throughput
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Warehouse winter comfort: The HTHV solution; Cooling with natural gas; Plastics industry booming

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me