EC: Pronto4 Agnostic Autonomy System Series 4

Motion Control - robotics: Kairos Autonomi Inc., Pronto4 Agnostic Autonomy System Series 4. The Pronto Agnostic Autonomy System is a robotics applique hardware kit that converts existing automobiles and other ground vehicles into robotic systems. This is a Control Engineering 2011 Engineers' Choice (EC) Honorable Mention.

11/01/2010


Pronto4 Agnostic Autonomy System Series 4 - The Pronto Agnostic Autonomy System is a robotics applique hardware kit that converts existing automobiles and other ground vehicles into robotic systems. This is a Control Engineering 2011 Engineers' Choice (EC) nominee.The patent-pending Pronto4 Agnostic Autonomy System Series 4 from Kairos Autonomi is a robotics applique kit installable on most existing automobiles and other ground vehicles in about 4 hours. Modes of operation include remote control, GPS path following, and intelligent self-navigation. The Pronto4 system attaches to a vehicle's human-operated controls: steering, brake, throttle and transmission. It receives power from the vehicle's battery, and weighs less than 75 lb. With the Pronto4 system installed, either a human or computer can operate the vehicle. This approach, utilizing a flexible attachment set that can be configured to meet the highly common human control paradigm, delivers robotic control capability to existing vehicles at less than 20% of the cost of developing purpose-built robotic systems. The Pronto4 system is a critical technology driver within the U.S. military testing and evaluation, training, and range clearance operations.

Recently, Naval Air Station (NAS) Fallon used the Pronto4 system to provide realistic moving land targets (MLTs) within training scenarios for pilots. The Pronto4 system was installed, along with a GPS receiver and a wireless emergency-stop system, on inexpensive used vehicles as MLTs as part of a live fire exercise with Navy F/A-18C fighter pilots. The MLT was programmed to drive unmanned on a runway while the pilots fired Enhanced Laser Guided Training Rounds (ELGTRs) at the unmanned vehicles.

During the initial test, eight ELGTRs were fired at the MLT, and a number of near hits were recorded. Since the initial exercises, more than 40 ELGTRs have been fired at MLTs powered by the Pronto4 system. NAS Fallon has procured a number of Pronto4 systems for future use. Spurred on by this success, Kairos Autonomi competed for and was awarded a contract with Luke Air Force Base (AFB) to deliver 12 Pronto4 systems for MLT training.

www.kairosautonomi.com

www.kairosautonomi.com/pronto4_system_s4.html

Kairos Autonomi Inc.

For more, see www.controleng.com/awards.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
Strategic outsourcing delivers efficiency; Sleeve bearing clearance; Causes of water hammer; Improve air quality; Maintenance safety; GAMS preview
World-class maintenance: The three keys to success - Deploy people, process and technology; 2016 Lubrication Guide; Why hydraulic systems get hot
Flexible offshore fire protection; Big Data's impact on operations; Bridging the skills gap; Identifying security risks
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me