EC: DX99...D Single-Chamber Instrinsically-Safe FlexPower Nodes

Network Integration - wireless - Banner Engineering - DX99...D Single-Chamber. Instrinsically-Safe FlexPower Nodes -The DX99...D Single-chamber Intrinsically-Safe FlexPower Node is a battery-powered, easy-to-install transceiver designed to wirelessly communicate data in hazardous areas. This is a Control Engineering 2011 Engineers' Choice (EC) nominee.

11/01/2010


DX99 D Single-Chamber Instrinsically-Safe FlexPowera NodesThe DX99...D Single-Chamber Intrinsically-Safe FlexPower Node by Banner Engineering is an innovative way to collect analog, digital and temperature information in hazardous areas. A single-chamber housing makes this recent version of the DX99 battery-powered intrinsically-safe wireless transceiver simpler to install. It also delivers a state-of-the-art combination of wireless communication, battery technology and intrinsically safe electronics within a smaller footprint.   

DX99 uses a liquid lithium battery to produce an intrinsically safe power source for the transceiver and an external third party sensor. When combined with low-power consumption sampling electronics, a standalone unit can operate for up to 10 years on a single battery. Its wireless technology is a highly tuned subsystem designed with industrial process applications in mind, designed to be reliable, be secure and provide diagnostic information about the status of the wireless link. DX99 has also been designed to transmit and receive up to 3 miles (150mw with 2dBi antenna) while consuming very little power. Every DX99 has a built-in site survey mode that allows the installer to quickly and easily determine the quality of the wireless link. These features, combined with its intrinsically safe operation, make the DX99 a superior solution for hazardous areas.   

DX99 transceivers are available in a rugged polycarbonate housing or metal housing; both options are intrinsically safe and rated IP67. Rugged polycarbonate housing models are certified for use in Class I, Division 1, Groups A, B, C, D; Class I, Zone 0, Group IIC; and Group IIC, Zone 0. Metal housing models certified for use in Class I, Division 1, Groups A, B, C, D; Class II, Division 1, Groups E, F, G; Class III, Division 1; Class I, Zone 0, Group IIC; Group IIC, Zone 0; and Dust, Zone 20.    

www.bannerengineering.com

www.bannerengineering.com/en-US/products/7/Wireless/774/Class-I-Div-1-DX99-FlexPower-Nodes 

Banner Engineering

For more, see www.controleng.com/awards



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2015 Top Plant: Phoenix Contact, Middletown, Pa.; 2015 Best Practices: Automation, Electrical Safety, Electrical Systems, Pneumatics, Material Handling, Mechanical Systems
A cool solution: Collaboration, chemistry leads to foundry coat product development; See the 2015 Product of the Year Finalists
Raising the standard: What's new with NFPA 70E; A global view of manufacturing; Maintenance data; Fit bearings properly
Special report: U.S. natural gas; LNG transport technologies evolve to meet market demand; Understanding new methane regulations; Predictive maintenance for gas pipeline compressors
Cyber security cost-efficient for industrial control systems; Extracting full value from operational data; Managing cyber security risks
Drilling for Big Data: Managing the flow of information; Big data drilldown series: Challenge and opportunity; OT to IT: Creating a circle of improvement; Industry loses best workers, again
Migrating industrial networks; Tracking HMI advances; Making the right automation changes
Understanding transfer switch operation; Coordinating protective devices; Analyzing NEC 2014 changes; Cooling data centers
Upgrading secondary control systems; Keeping enclosures conditioned; Diagnostics increase equipment uptime; Mechatronics simplifies machine design

Annual Salary Survey

After almost a decade of uncertainty, the confidence of plant floor managers is soaring. Even with a number of challenges and while implementing new technologies, there is a renewed sense of optimism among plant managers about their business and their future.

The respondents to the 2014 Plant Engineering Salary Survey come from throughout the U.S. and serve a variety of industries, but they are uniform in their optimism about manufacturing. This year’s survey found 79% consider manufacturing a secure career. That’s up from 75% in 2013 and significantly higher than the 63% figure when Plant Engineering first started asking that question a decade ago.

Read more: 2014 Salary Survey: Confidence rises amid the challenges

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.